Drum Atlas
Menu

Sabian · Artisan

Sabian Artisan 18" Crash

  • Cymbal
  • flagship
  • current

The Sabian Artisan 18" Crash is a thin, high-density hand-hammered B20 bronze crash from Sabian's flagship range. Sabian calls the Artisan crashes fast, dark and dirty, opening up with musically rich complex texture, and says the fast, full, dark tone fits easily into any musical setting.

Updated 2026-09-24Sources

Dirty, and meant to be

“Dirty” is Sabian’s own word for these crashes and it is a description rather than a warning. High- density hand hammering scatters the overtone series thoroughly, so the accent does not resolve into a clean pitch — there is grit and complexity in it.

At 18 inches and a thin taper the cymbal is also fast, which is the combination that makes it usable rather than merely characterful. It lands, it is complex, and it clears.

Thin at flagship level

There is a temptation to read “flagship” as “heavier” or “louder”. It usually means the opposite: the top of a cast range tends to be thin and heavily worked, because that is where complexity lives. This crash is thin, and it will reach its ceiling under a hard stroke.

If you need a crash that keeps going when you hit it harder, an AAX medium or heavy crash is the honest answer and costs less.

18 against 16

Both are catalogued here. The 16 is quicker and higher and works as a secondary accent; the 18 has the diameter for a low fundamental and is the main crash of the two. Same taper, so they pair rather than duplicate.

Individual variation

High-density hand hammering is done by people. Two examples of this crash will not weigh the same or sound identical, which is the cost of what the range is sold for and the reason to choose one in person.

Specifications

Specifications
AttributeValue
Cymbal
TypeCrash1
AlloyB20 bronze1
WeightThin1
CharacterFast, dark and dirty, opening up with musically rich complex texture that fits easily into any musical setting1
HammeringHigh-density hand hammering2
Series voicingMasterpiece in style, dark in sound2
Catalogue numberA18061
Origin
Made inCanada3Sabian's plant and R&D are at 219 Main St, Meductic, New Brunswick.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    18" Artisan Crash — A1806

    Sabian · accessed 2026-09-24

  2. 2Tier 1 · Primarymanufacturer spec

    Artisan series

    Sabian · accessed 2026-09-24

  3. 3Tier 1 · Primarymanufacturer spec

    FAQ — contact

    Sabian · accessed 2026-09-24