
Meinl · Byzance Traditional
Meinl Byzance Traditional 20" Medium Ride
The Meinl Byzance Traditional 20" Medium Ride is a medium ride in B20 bronze. Meinl rates its character warm, smooth, its pitch high-mid, its sustain medium. Made in Turkey.
Narrow blade lathing
Meinl specifies the lathe blade width, which almost nobody else does, and it is a more useful number than it looks.
A narrow blade cuts a fine groove and removes less metal per pass. The surface ends up smoother and the cymbal retains more material, which gives a more focused sound, tighter stick definition and less spread than a wide-groove cymbal.
Put this next to the Zildjian A Sweet Ride, which uses traditional wide-groove lathing. Same alloy, similar diameter, opposite lathing philosophy — and the Sweet Ride is the washy, open one while the Byzance is the defined, controlled one. The lathing is doing much of that.
German company, Turkish cymbals
Worth knowing because it confuses people: Meinl is a German company based in Gutenstetten, and the Byzance line is made in Turkey by Turkish smiths using traditional methods.
This is not outsourcing to save money — Byzance is Meinl’s flagship line and among its most expensive. It is the same reasoning that makes the Istanbul Agop entry interesting: the Turkish hand process produces a sound that industrial manufacture does not, so the company that wants that sound goes where the process lives.
Meinl’s cheaper lines are made in Germany and Asia by machine. The Byzance is the handmade one.
Traditional, Dark, Extra Dry, Vintage
The Byzance line is large and the sub-names describe finishing rather than alloy. All of them are hand-hammered B20.
- Traditional — fully lathed, polished-bright surface. The balanced, general-purpose one.
- Dark — unpolished raw finish. Warmer and less bright.
- Extra Dry — heavy irregular hammering and partial lathing. Very dry, very short, very trashy.
- Vintage — thin and aged-looking, for a soft, old sound.
So the Traditional here and the Extra Dry Thin Ride already catalogued are the two ends of one family. The Traditional is the one to start with; the Extra Dry is the specialist.
What it sounds like
Balanced and controllable, with a defined ping, a warm underlying tone, medium sustain and bright overtones sitting over the top. The bell is clear without being harsh.
It is the least opinionated cymbal in the Byzance range and consequently the most useful single ride in it. Where the Extra Dry imposes a sound on whatever you play, this one mostly does what you ask.
Where it fits
A general-purpose professional ride, at home in most music that is not extremely loud. If you want one hand-hammered Turkish ride and you are not sure what you want from it, this is the safer choice than any of the more characterful variants.
Specifications
| Attribute | Value |
|---|---|
| Cymbal | |
| Weight, 20 in | 2348 g4A weighed individual example. Cast cymbals vary; treat as representative rather than specified. |
| Type | Ride1 |
| Weight | Medium1 |
| Pitch | High-Mid1 |
| Character | Warm, Smooth1 |
| Timbre | Mid-Bright1 |
| Volume | Medium1 |
| Sustain | Medium1 |
| Lathing | Narrow Blade1 |
| Shaping | Hand Hammered1 |
| Finish | Traditional1 |
| Music styles | Rock, Pop, Fusion, Jazz, Funk, R&B, Reggae, Studio, World1 |
| Alloy | B20 Bronze1 |
| Origin | |
| Made in | Turkey2Meinl's Byzance Traditional page says: "Made in Turkey from B20 bronze, hand-hammered into shape, narrow blade lathing, and traditional finish." |
| model | |
| Model number | B20MR1 |
Where to find it
Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec
- 3Tier 2 · Highmanufacturer spec
- 4Tier 2 · Highretailer listing