Drum Atlas
Menu

Istanbul Agop · Agop Signature

Istanbul Agop Signature 18" Crash

  • Cymbal
  • flagship
  • current

The Istanbul Agop Signature 18" Crash is a paper-thin, hand-hammered cast bronze crash from the series completed from Agop Tomurcuk's notebook. Istanbul describes it in four words — paper thin, dark, dry and low pitched — which is an unusually specific brief for a crash this size.

Updated 2026-09-24Sources

Paper thin at eighteen inches

Paper thin is the lightest weight a cymbal maker names, and eighteen inches is a lot of area to spread that little metal across. The result is a crash with almost no resistance: it gives under the stick immediately, comes up to full volume at once, and then falls away.

A heavier 18 wants to be hit. This one only wants to be brushed past.

Low pitched by geometry

Pitch in a cymbal falls as diameter rises and as thickness drops, and this cymbal is at the far end of both. That is why Istanbul’s description can say dark and low pitched without qualification — the physics is doing the work before any hammering is applied.

What comes out is a crash that sits below where a crash usually sits, closer to the register of a thin ride. It blends downward into a band rather than sitting on top of it.

Dry and thin together

Dry usually implies control, and control usually implies mass. This series gets there the other way: heavy hammering breaks up the sustained modes so the cymbal decays quickly without needing to be thick. The crash opens fast, says its piece and stops.

Handle it gently

Paper-thin cymbals of any make are the most easily damaged in a kit, because there is so little metal between the edge and the stick. Played with a glancing stroke rather than a direct hit, they last; played like a rock crash, they are being asked for something they were not built to give.

Specifications

Specifications
AttributeValue
Cymbal
TypeCrash1
WeightPaper thin1
CharacterDark, dry and low pitched1
Series voicingThe final creation of founder Agop Tomurcuk, completed posthumously from a personal notebook1
HammeringHand hammered2
FormingCast bronze, melted and poured in the factory2
AlloyB20 bronze — 80% copper, 20% tin3Istanbul Agop states the composition on its factory tour page: "B20 Bronze alloy is a mixture of 80% Copper and 20% Tin". Earlier records here said the maker publishes no alloy, which was true of the product and history pages and wrong about the factory tour.
Origin
Made inTurkey2Istanbul, where Agop Tomurcuk founded the company in 1980.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    18" Agop Signature Crash

    Istanbul Agop · accessed 2026-09-24

  2. 2Tier 1 · Primarymanufacturer spec

    About — history

    Istanbul Agop · accessed 2026-09-24

  3. 3Tier 1 · Primarymanufacturer spec

    Factory Tour

    Istanbul Agop · accessed 2026-10-14