Drum Atlas
Menu

Bosphorus · Turk

Bosphorus Turk 20" Thin Ride

  • Cymbal
  • pro
  • current

The Bosphorus Turk 20" Thin Ride is a completely unlathed, hand-hammered cast bronze ride. Bosphorus describes the Turk series as a dark raw voice with an exotic stick sound, for players after a dark esoteric character — at 20 inches and thin, that means a quiet, dry ride that crashes readily.

Updated 2026-09-24Sources

Unlathed, and what you can see

The Turk series shows every hammer mark, because nothing is cut away afterwards. That is not only cosmetic: the marks are the acoustic design. Each one is a local change in thickness and curvature, and together they break the surface into regions that do not ring in sympathy.

A lathed cymbal has that variation partly machined out. This one keeps all of it.

Thin and raw at twenty inches

The two decisions push in the same direction. Thin lowers the pitch and shortens the sustain; raw scatters the overtones. The result is a ride with a low, dry knock under the stick and very little building wash — and one that will open into a crash without much persuasion.

This is a jazz and small-room cymbal in the most specific sense. Behind a loud band it will disappear, and nothing about it is designed to prevent that.

Against the Traditional 20 thin ride

Bosphorus makes the same size and weight in the fully lathed Traditional series, and the pair is the clearest A/B in the catalogue. Same blank, same hammering tradition, one lathed and one not.

The Traditional shimmers and sustains. This one knocks and stops. Everything else about them is held constant, which makes it a genuinely useful comparison rather than a marketing one.

What Bosphorus will and will not tell you

The maker publishes the series character, the fact that it is unlathed, and how the cymbals are made — all of it verified above. It publishes no alloy, no weights, and no per-model pages, so the existence of this size and weight comes from a dealer and is marked as tier two.

Specifications

Specifications
AttributeValue
Cymbal
TypeRide4*Bosphorus lists its Turk models only in a size-chart image, so the existence of this size, weight and type is taken from a dealer listing.
WeightThin4*Weight variant as the dealer catalogues it; Bosphorus does not publish the weight grid in text.
LathingCompletely unlathed1
CharacterA dark raw voice with an exotic stick sound; heightened response and intense aural nuance1
HammeringHand hammered — Bosphorus uses electric power only for rolling, pressing the bell and turning the lathing plate2
FormingCast, then hard hammered and fine hammered2
Model codeK20RT4*Dealer catalogue number; Bosphorus does not publish model codes on its own site.
AlloyB20 cast bronze2*Bosphorus publishes no alloy — not on the about page, the how-we-make-cymbals page or the series pages. This figure is not the maker's.
Origin
Made inTurkey3Bosphorus gives its address as Sultangazi, Istanbul, Turkey.
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Turk Series

    Bosphorus Cymbals · accessed 2026-09-24

  2. 2Tier 1 · Primarymanufacturer spec

    How we make cymbals

    Bosphorus Cymbals · accessed 2026-09-24

  3. 3Tier 1 · Primarymanufacturer spec

    Contact

    Bosphorus Cymbals · accessed 2026-09-24

  4. 4Tier 2 · Highretailer listing

    Bosphorus 20" Turk Thin Ride Cymbal (K20RT)

    Memphis Drum Shop · accessed 2026-09-24