Amedia · Tigris
Amedia Tigris 18" Crash
The Amedia Tigris 18" Crash is a hand-made cast cymbal with a lathed and polished bow and an unlathed, patinated edge. Amedia's description of the crash is three words — explosive, raw, dark — which follows directly from putting a raw edge on a polished cymbal.
The edge is where a crash lives
On a ride the stick spends its time on the bow. On a crash almost all the energy goes into the edge, which is precisely the region Amedia leaves unlathed and allows to patinate.
So the Tigris crash is, acoustically, mostly a raw cymbal — and its description says so. The polished bow contributes to how it sounds after the initial hit, but the character of the crash itself comes from metal that was never cut back.
Explosive and dark at once
Raw surfaces usually trade volume for dryness. “Explosive” says this one does not: the attack is immediate and loud.
That works because the stiffness of an unlathed edge raises the cymbal’s resistance without adding much mass. It takes more energy to get moving and then releases it quickly, which reads as an explosive front rather than a slow swell. The darkness comes from the same place — the raw surface never develops the bright partials a lathed edge would.
Eighteen inches
The largest crash in the Tigris range, which runs 14 to 18. At that size a dark, explosive crash is a main accent rather than a colour, and it pairs naturally with the 22 ride from the same series because the surfaces and the finish match.
Patina is part of the design
Amedia’s word is “patinated”, not “raw” — the edge is meant to darken and will continue to. That is a deliberate aesthetic and not something to polish off. The maker publishes no alloy or weight, so neither is asserted here beyond a marked inference.
Specifications
| Attribute | Value |
|---|---|
| Cymbal | |
| Type | Crash1 |
| Character | Explosive, raw, dark sound1 |
| Lathing | Lathed and polished bow; unlathed and patinated edge1 |
| Model code | TG-C1 |
| Crash sizes offered | 14, 15, 16, 17 and 18 inch1 |
| Series voicing | Exotic sister series to the Euphrates line1 |
| Construction | 100% handmade, by hammer smiths and lathe men2 |
| Alloy | B20 cast bronze2*Amedia publishes no alloy on its series or about pages. This figure is not the maker's. |
| Origin | |
| Made in | Turkey2Amedia was established in 2005 as a family company and states that its cymbals are made at its own foundry. |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec