Drum Atlas
Menu

Yamaha · Custom

Yamaha YV-4110 Vibraphone

  • Concert percussion
  • flagship
  • current

The YV-4110 is Yamaha's four-octave custom vibraphone, C28 to C76 — a full octave more than the three-octave instrument most vibraphone writing assumes. Bars are Yamaha's own gold-finished aluminium alloy, in glossy or matte, and the motor is a pause-memory controller running 25 to 145 rpm.

Updated 2026-09-24Sources

What makes a vibraphone a vibraphone

Metal bars, resonator tubes, a damper pedal, and discs inside the tops of the resonators driven by a motor. As the discs spin they alternately open and close each tube, which pulses the coupling between bar and resonator and produces the tremolo the instrument is named for. The pedal is the other half of it: unlike a marimba, a vibraphone rings until it is damped, so the pedal and the mallet dampening done with the hands are as much of the technique as striking the bars.

Four octaves

Three octaves, F to F, is the standard vibraphone and the range almost all writing for the instrument assumes. The YV-4110 goes to four, C28 to C76, extending in both directions. For a player composing, arranging or improvising, that extra range at the bottom changes what voicings are available — a chord can be spread rather than cramped into the middle — and Yamaha’s stated purpose for the instrument is exactly that.

The motor, and the pause memory

The YVM300 controller runs the fans between 25 and 145 rpm, from a slow shimmer to a fast flutter, and it remembers where it stopped. Pausing the fans mid-piece with the discs in a known position matters because stopping them half-closed changes the tone of every subsequent note; a controller that returns to the same place removes that variable.

Bars

Yamaha’s own aluminium alloy, gold finished, graduating from 1½ to 2¼ in wide at a constant ½ in thickness. The glossy and matte finishes are offered on otherwise identical instruments — the glossy bar being the brighter and more projecting of the two, the matte more mellow and focused, in Yamaha’s own description of the pairing across its vibraphone range.

Specifications

Specifications
AttributeValue
perc
TypeVibraphone1
Range4 octaves, C28–C761
BarsYamaha exclusive aluminium alloy, gold finish in glossy or matte1
Bar sizesGraduating from 1½ to 2¼ in wide, ½ in thick1
ResonatorsGold finish1
MotorYVM300 pause-memory controller, 25–145 rpm1
PitchA = 442 Hz; other pitches to special order1
Height adjustment33⅞ to 37 in1
Weight207 lb1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    YV-4110(M) — Specs

    Yamaha · accessed 2026-09-24

  2. 2Tier 1 · Primarymanufacturer spec

    YV-4110(M) — Overview

    Yamaha · accessed 2026-09-24