Yamaha · Professional
Yamaha YM-4600A Marimba
The YM-4600A is Yamaha's 4⅓-octave professional marimba, A25 to C76, on graduated Honduran rosewood bars. The cutaway resonators carry a three-position tracking system and cut weight while adding strength, and the frame adjusts by pneumatic strut. It is 86¾ in long against the five-octave's 108¼.
Four and a third octaves
A25 to C76: from the A below the bass staff up to the top C. This is the range most concert band and orchestral marimba writing sits in, and the range the standard études and most ensemble parts were written for. It stops a major sixth above the bottom of a five-octave instrument, and the difference in the instrument is dramatic — 86¾ in long against 108¼, and correspondingly less to move, store and pay for.
Cutaway resonators
The resonator tubes below the low bars on a marimba are long, and on a full instrument they reach nearly to the floor. A cutaway design flattens the profile so the lowest tubes fold rather than hang straight, which Yamaha says both strengthens the assembly and reduces weight. The three-position tracking system lets the resonator height under the bars be set, which changes how much the tube couples to its bar — a brighter, more immediate sound or a rounder one with more sustain.
Graduated rosewood
The bars are Honduran rosewood and graduate from 2½ in wide at the low end down to 1⅝ in at the top, thinning from 1 in to ¾ in as they go. That taper is what keeps the tone consistent across the instrument rather than having a heavy bottom and a thin top.
Setting it up
Hinged resonators and rails and a two-piece crossbar make it fold down; 4 in casters get it across a rough floor; and the pneumatic struts let one person raise or lower the playing height between 33⅞ and 39¾ in. Marimba height is personal — it decides the angle of the wrists over a long piece — and an instrument shared between players in a school gets adjusted constantly.
Specifications
| Attribute | Value |
|---|---|
| perc | |
| Type | Marimba2 |
| Range | 4⅓ octaves, A25–C762 |
| Bars | Honduran rosewood, graduated2 |
| Bar sizes | Graduating from 2½ to 1⅝ in wide and 1 to ¾ in thick2 |
| Resonators | Cutaway design with a 3-position tracking system, brushed tan finish2 |
| Pitch | A = 442 Hz; other pitches to special order2 |
| Height adjustment | 33⅞ to 39¾ in, by pneumatic strut2 |
| Frame | Hinged resonators and rails with a two-piece crossbar; 4 in casters1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec