Yamaha · 4300
Yamaha TP-4300R Timpani
The TP-4300R puts aluminium bowls on the same frames and mechanism as Yamaha's copper-bowled professional models, with bowl geometry worked out for what aluminium does rather than borrowed from copper. Four sizes from 23 to 32 in, each around 20 lb lighter than the copper equivalent.
Aluminium instead of copper
Copper is the traditional timpani bowl and the one a professional orchestra expects. Aluminium is lighter, cheaper and behaves differently: it is less dense and more rigid for its weight, and a bowl made of it will not simply sound like a copper one at a discount. Yamaha’s stated approach is to design for the material rather than around it — bowl size, bearing edge shape and the diameter of the vent hole at the bottom were all worked out for aluminium, aiming at tone and resonance similar to copper.
Everything else is the professional instrument
The frame, the floating mount, the pedal balance spring system, the Renaissance heads and the relocatable tuning gauge are all as on the 7300. So is the caster arrangement, the 25 mm height adjustment and the one-touch caster lock with an auxiliary brake at the pedal. What the 4300 gives up is the copper bowl; what it keeps is the mechanism a player’s hands and feet actually touch.
Where the weight lands
62 lb for the 23 in drum up to 75 lb for the 32 in. Copper bowls of the same sizes run around 73 to 100 lb. On a set of four that is most of a hundred pounds, which decides whether a university or a touring ensemble can move its own timpani.
Specifications
| Attribute | Value |
|---|---|
| perc | |
| Type | Timpani1 |
| Bowl | Aluminium1 |
| Sizes | 23, 26, 29 and 32 in2 |
| Ranges | 23 in c–a♭, 26 in A–f, 29 in F–d♭, 32 in D–B♭2 |
| Tuning mechanism | Pedal balance spring system1 |
| Bowl mounting | Floating Mount suspension ring1 |
| Heads | Yamaha Remo Renaissance with aluminium insert rings1 |
| Weight | 62 lb at 23 in, rising to 75 lb at 32 in2 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec