Drum Atlas
Menu

Studio 49 · Series 2000

Studio 49 AGd Alto Glockenspiel, Series 2000

  • Concert percussion
  • pro
  • current

The AGd is Studio 49's Series 2000 alto glockenspiel: sixteen silver-grey steel bars of 20 by 3mm, covering a diatonic c2 to a3 with F sharp and B flat included. Bars sit on rubber pins over rubber tubing, and two S 2 mallets are supplied. Studio 49 describes the sound as expressive and rich.

Updated 2026-09-24Sources

Twenty by three millimetres

A glockenspiel bar is a small steel bar, and its two dimensions do very different things.

Width — 20mm here — sets how much surface there is to radiate sound. Wider bars are louder and fuller. Thickness — 3mm — is what sets the pitch, along with length: a bar’s frequency rises with thickness and falls with the square of its length.

Twenty by three is a substantial section for an Orff glockenspiel. The instrument is loud for its size, and every bar is cut to length from the same stock, so the pitch is in the cutting rather than in a varying profile.

Studio 49 also ships the same instrument voice in other series with different bar materials, which is what the series number encodes. This one is steel.

Steel, and the long decay

Steel is the reason a glockenspiel sounds like a glockenspiel: very hard, very stiff, almost no internal damping.

A struck steel bar rings for a long time, with strong upper partials well above the fundamental — which is why a glockenspiel reads as bright and bell-like, and also why glockenspiel parts are written sparsely. There is no damper on this instrument. Notes overlap until they decay, and the player manages that by choosing what not to play.

The silver-grey finish is the bars left as steel rather than plated or lacquered, which is the standard for instruments in this range.

Rubber pins, rubber tubing

The Series 1600 xylophone uses flexible pins over textile tubing. This one uses rubber for both.

The choice follows the material. A steel bar is heavier than a wooden one and returns far more energy at the point of support, so the support has to absorb more without damping the bar’s ring. Rubber tubing does that where a textile cord would compress and wear.

The pins locate rather than clamp, as on every Orff instrument, because the bars come off. That is the whole pedagogy: leave only the notes the piece needs on the frame, and the class can play it.

Where it sits

Two octaves starting at c2, an octave above the Series 1600 alto xylophone — which is what “alto” means on a glockenspiel rather than on a xylophone, and a reliable source of confusion.

An Orff ensemble stacks these: soprano and alto glockenspiels at the top, soprano and alto xylophones and metallophones in the middle, bass xylophone and bass metallophone underneath. Studio 49 builds all of them, in the same series grades, so a room can be equipped in one order and the instruments will match.

Specifications

Specifications
AttributeValue
Origin
Made inGermany2
perc
TypeAlto glockenspiel, Orff-Schulwerk1
RangeDiatonic c2–a3, including F sharp and B flat1
Bars16, silver-grey premium steel1
Bar section20 × 3 mm1
Bar mountingRubber pins locating the bars, over rubber tubing1
IncludedTwo S 2 mallets1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    AGd Alt-Glockenspiel Serie 2000

    Studio 49 · accessed 2026-09-24

  2. 2Tier 1 · Primarymanufacturer spec

    Royal Percussion

    Studio 49 · accessed 2026-09-24