---
title: "Yamaha Recording Custom Aluminum"
brand: "Yamaha"
category: "Snare drum"
url: "https://thedrumatlas.com/snare-drums/yamaha-recording-custom-aluminum"
updated: "2026-09-11"
reviewed: "yes"
---

# Yamaha Recording Custom Aluminum

The Yamaha Recording Custom Aluminum (RAS-1455) is a 14 × 5.5-inch snare drum with a 1.2mm aluminium shell carrying an external centre bead — a first for Yamaha. Developed with Steve Gadd, it ships with both a 20-strand and a 10-strand snare set, the latter based on Gadd's habit of cutting the middle wires out of his own.

**Sizes:** 14 × 5.5 in, 14 × 6.5 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Shell material | Aluminium | verified | Sweetwater |
| Shell thickness | 1.2 mm | verified | Sweetwater |
| Bead | External centre bead | verified | Sweetwater |
| Bearing edge | 45° | verified | Sweetwater |
| Snare bed | 2.4 mm | verified | Sweetwater |
| Lugs | 10 one-piece | verified | Sweetwater |
| Hoops | 3.0mm aluminium die-cast | verified | Sweetwater |
| Throw-off | Q-Type | verified | Sweetwater |
| Butt plate | DC3 | verified | Sweetwater |
| Snare wires | 20-strand supplied, plus a 10-strand set | verified | Sweetwater |
| Batter head | Remo Coated Ambassador | verified | Sweetwater |
| Resonant head | Remo Ambassador snare-side, 3 mil | verified | Sweetwater |

## Two sets of wires in the box

The most interesting thing about this drum is a detail most spec sheets bury: it ships with two
snare sets, a conventional 20-strand and a 10-strand.

The 10-strand comes directly from Steve Gadd's own practice of cutting the four middle wires out
of a 14-strand set. Fewer wires across the centre of the head means less sympathetic buzz — the
rattle a snare picks up from toms, from the bass drum, and from anything else happening in the
room — and a higher ratio of head to wire in what you hear.

The result is a drier, more delicate snare sound with more of the drum in it. It is a real change,
not a subtlety, and having both sets in the box makes the drum two instruments.

## The external bead

Aluminium shells are thin and want to flex. The usual answer is a bead rolled into the shell, as
on a Supraphonic, which stiffens the cylinder and lifts the pitch.

Yamaha put the bead on the **outside** here rather than forming it through the shell. The stated
aim is the stiffening without the internal disruption to the shell's inner surface. In practice
it gives a focused, controlled voice with less of the loose metallic ring that a Supra has.

Paired with 3mm die-cast hoops — considerably heavier and more rigid than triple-flanged steel —
you get a drum that is noticeably more contained than its obvious rival.

## Against a Supraphonic

They are both 14-inch aluminium snares and they do not sound alike.

The **Supraphonic** is brighter, looser and more open, with a metallic ring around the note that
is a large part of its character. It is forgiving and it has personality.

The **Recording Custom** is tighter, drier and more even, with the overtones pulled in. It was
designed for microphones, and it behaves like it — a drum that needs less work to sit in a mix and
gives the engineer less to fight.

Which is better depends entirely on whether you want the drum to have an opinion.

## Where it fits

Studio work first, which is what the line name says. Also an excellent choice for anyone who
records themselves, plays in dense arrangements, or has simply had enough of chasing a ring they
cannot tune out.

If you want character and air, the Supra is the cheaper and more charming drum.

## Sources

1. Yamaha Recording Custom Aluminum Snare Drum 5.5 × 14, Brushed — Sweetwater (tier 2) https://www.sweetwater.com/store/detail/RAS-1455--yamaha-recording-custom-snare-drum-5.5-inch-by-14-inch-aluminum
2. Yamaha Recording Custom snare drums review — MusicRadar (tier 2) https://www.musicradar.com/reviews/yamaha-recording-custom-snare-drums

---
Source: https://thedrumatlas.com/snare-drums/yamaha-recording-custom-aluminum · Values marked "unverified" are editorial knowledge awaiting a source.
