---
title: "Tama S.L.P. G-Bubinga"
brand: "Tama"
category: "Snare drum"
url: "https://thedrumatlas.com/snare-drums/tama-slp-g-bubinga"
updated: "2026-09-24"
reviewed: "no"
---

# Tama S.L.P. G-Bubinga

The Tama S.L.P. G-Bubinga is a 14 × 6-inch snare drum on a 12-ply, 10mm all-bubinga shell with a quilted bubinga outer ply, separate low-mass lugs, 2.3mm steel Mighty Hoops and the patented Linear-Drive strainer. At 10mm it is one of the thickest wood shells in production.

**Sizes:** 14 × 6 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Model | LGB146 | verified | Tama |
| Shell material | Bubinga, with a quilted bubinga outer ply | verified | Tama |
| Plies | 12 | verified | Tama |
| Shell thickness | 10 mm | verified | Tama |
| Lugs | Separate low-mass lugs | verified | Tama |
| Hoops | 2.3mm steel Mighty Hoop, triple flanged | verified | Tama |
| Throw-off | Linear-Drive strainer | verified | Tama |
| Strainer patent | US 8017846 | verified | Tama |
| Snare wires | 20-strand Starclassic carbon steel | verified | Tama |

## The G shells

Tama's G-series S.L.P. drums are the thick ones: G-Maple at twelve plies and 11mm, G-Walnut at ten
plies and 9mm, G-Bubinga at twelve plies and 10mm. In every case the idea is the same — a shell
heavy enough that it returns almost all of the stroke to the head.

Bubinga is the densest of the three woods, so the G-Bubinga is the heaviest drum in the group by a
clear margin even though it is a millimetre thinner than the G-Maple.

## Low-mass lugs on a high-mass shell

The lugs are deliberately small and separate — one casting per tension rod rather than a
double-ended lug spanning both heads. Less hardware bolted to the shell means less of the
cylinder is damped by something that is not the shell itself.

On a 10mm bubinga drum that is a fine adjustment rather than a transformation, but it is the
consistent Tama approach across the S.L.P. range and it does keep the drum from sounding dead.

## The Linear-Drive strainer

The same ratcheted strainer fitted to the Starphonic drums, patented in the United States as
8017846. Its tension adjustment runs on fine gears rather than on friction, so a setting holds at
high wire tension and can be returned to by counting clicks.

On a drum this loud, where the wires are usually run tight, that is a practical benefit rather
than a specification-sheet one.

## Sources

1. S.L.P. G-Bubinga LGB146 — Tama (tier 1) https://www.tama.com/usa/products/snare_drums/slp_g-bubinga_snare_drum.html

---
Source: https://thedrumatlas.com/snare-drums/tama-slp-g-bubinga · Values marked "unverified" are editorial knowledge awaiting a source.
