---
title: "Sonor Kompressor Aluminum"
brand: "Sonor"
category: "Snare drum"
url: "https://thedrumatlas.com/snare-drums/sonor-kompressor-aluminum"
updated: "2026-09-11"
reviewed: "yes"
---

# Sonor Kompressor Aluminum

The Sonor Kompressor Aluminum (KS-140575-SDA) is a 14 × 5.75-inch snare drum on a beaded 2mm aluminium shell — unusually thick for the metal — with 45-degree edges and 2.3mm Power Hoops. It is Sonor's accessible metal snare and the thickest aluminium shell in common production.

**Sizes:** 14 × 5.75 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Shell material | Aluminium | verified | Sonor |
| Shell thickness | 2 mm | verified | Drum Center of New Hampshire |
| Bead | Beaded shell | verified | Drum Center of New Hampshire |
| Bearing edge | 45° | verified | Drum Center of New Hampshire |
| Lugs | 10 Double TuneSafe | verified | Drum Center of New Hampshire |
| Hoops | 2.3mm Power Hoops | verified | Drum Center of New Hampshire |
| Throw-off | Sonor Standard | verified | Drum Center of New Hampshire |
| Snare wires | 20-strand Sonor Standard | verified | Drum Center of New Hampshire |
| Sibling models | Brass, 1.2mm black nickel-plated; bronze | verified | Drum Center of New Hampshire |

## Two millimetres of aluminium

Aluminium snare shells are usually thin. A Supraphonic is 1.7mm, a Yamaha Recording Custom is
1.2mm, an Acrolite is thinner still. Thin aluminium is light, lively and rings freely.

Sonor went to **2mm**, which is heavy for the metal, and the drum that comes out is a different
animal. A thicker shell is stiffer, so it vibrates less and imposes less of its own voice on the
head. The result is dry and focused with a short decay — crisp rather than ringing, and it cuts
without the metallic halo that thinner aluminium drums carry.

If you have ever tuned a Supraphonic and wished the ring would just stop, this is the drum that
answers that.

## The 5.75-inch depth

Sonor has used unusual depths for decades and this is one of them: a quarter inch deeper than the
common 5.5, three quarters shallower than a 6.5.

In practice it behaves like a slightly generous 5.5 — the response and the tuning range of a
shallow drum with a little more body underneath. There is no mystery to it, but it does mean
aftermarket cases and some stands sized to exact depths need checking.

## Double TuneSafe lugs

Sonor's lug design uses a secondary locking element to resist the tension rod backing off under
vibration. Snare drums detune from the top down over a gig more than players notice, and
particularly on a drum tuned high.

It is not a glamorous feature. It is the sort of thing that makes the drum you tuned at soundcheck
still be in tune at the end of the second set.

## Where it fits

This is Sonor's accessible metal snare — German design and build at a price well below the
company's flagship lines, and well below most of the metal drums it competes with.

The obvious comparison is the Ludwig Acrolite, which is also an inexpensive aluminium snare, and
the Kompressor is the drier, more modern, better-appointed drum of the two. The Acrolite has more
character and costs less.

Sonor builds the same drum in brass and bronze. The brass is brighter and more projecting; the
aluminium is the dry one, and the one to choose if control is what you are after.

## Sources

1. KS 14×5.75 SDA — Sonor (tier 1) https://www.sonor.com/drums/instruments/products/ks-14x575-sda
2. New Sonor Kompressor Snare Drums Review — Drum Center of New Hampshire (tier 2) https://drumcenternh.com/blogs/news/new-sonor-kompressor-snare-drums-review-affordable-german-metal

---
Source: https://thedrumatlas.com/snare-drums/sonor-kompressor-aluminum · Values marked "unverified" are editorial knowledge awaiting a source.
