---
title: "Philadelphia Drum Co Tri-Wood Stave Snare"
brand: "Philadelphia Drum Company"
category: "Snare drum"
url: "https://thedrumatlas.com/snare-drums/philadelphia-drum-co-tri-wood-snare"
updated: "2026-09-24"
reviewed: "no"
---

# Philadelphia Drum Co Tri-Wood Stave Snare

A stave shell built from three Pennsylvania hardwoods at once — walnut, cherry and maple, alternating around the shell. The staves are hand-joined and turned, then given the shop's rounded outer edge over a 45-degree inner cut, with black nickel die-cast tube lugs and an INDe strainer. Catalogued at 12 by 5.75, 13 by 5.5, 14 by 6.5 and 14 by 7.25 in.

**Sizes:** 12 × 5.75 in, 13 × 5.5 in, 14 × 6.5 in, 14 × 7.25 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Shell material | Walnut, cherry and maple | verified | Philadelphia Drum Company |
| Construction | Handmade solid stave shell in three alternating species | verified | Philadelphia Drum Company |
| Bearing edge | Hand-carved rounded outer edge with a 45-degree inner cut | verified | Philadelphia Drum Company |
| Lugs | Black nickel die-cast tube lugs | verified | Philadelphia Drum Company |
| Hoops | Stick saver | verified | Philadelphia Drum Company |
| Strainer | INDe Premium, with matching butt plate | verified | Philadelphia Drum Company |
| Snare wires | PureSound Custom | verified | Philadelphia Drum Company |
| Made in | United States — Philadelphia, Pennsylvania | verified | Philadelphia Drum Company |

## Three woods in one shell

A stave shell is assembled from individual strips, which makes mixing species trivial in a way it
is not for a ply or steam-bent shell. Philadelphia Drum Co uses that to build a wall of walnut,
cherry and maple together: walnut for warmth and low end, maple for brightness and projection,
cherry sitting between them.

Acoustically it is a blend rather than three separate voices — the shell vibrates as one — but the
mixture changes the average density and stiffness of the wall, and it is visible from across a
room.

## Four sizes, including two small ones

The catalogued Tri-Wood drums run from a 12 by 5.75 in through a 13 by 5.5 to two 14 in drums at
6.5 and 7.25 in deep. Small-diameter stave snares are unusual because the staves have to be
narrower and the joints multiply, so a 12 in build says something about the shop's joinery.

Black nickel die-cast tube lugs, stick saver hoops and the INDe Premium strainer complete it.

## Sources

1. 14x6.5 in Tri-Wood Stave Snare — Philadelphia Drum Company (tier 1) https://phillydrumco.com/shop/p/14-x-65-tri-wood

---
Source: https://thedrumatlas.com/snare-drums/philadelphia-drum-co-tri-wood-snare · Values marked "unverified" are editorial knowledge awaiting a source.
