---
title: "PDP Concept Brushed Brass"
brand: "PDP"
category: "Snare drum"
url: "https://thedrumatlas.com/snare-drums/pdp-concept-brushed-brass"
updated: "2026-09-24"
reviewed: "no"
---

# PDP Concept Brushed Brass

The PDP Concept Brushed Brass is a 1.2mm rolled and double-beaded brass snare drum with a brushed satin exterior, built at 14 inches in 5, 6.5 and 8-inch depths. It carries dual-turret lugs, True Pitch tension rods and the DW MAG throw-off, and PDP describes a heavy attack with a wide tuning range.

**Sizes:** 14 × 5 in, 14 × 6.5 in, 14 × 8 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Part numbers | PDSN0514NBBC, PDSN6514NBBC, PDSN0814NBBC | verified | Pacific Drums and Percussion |
| Shell material | Rolled brass | verified | Pacific Drums and Percussion |
| Shell thickness | 1.2 mm | verified | Pacific Drums and Percussion |
| Bead | Double-beaded | verified | Pacific Drums and Percussion |
| Lugs | Dual-turret | verified | Pacific Drums and Percussion |
| Throw-off | DW MAG throw-off | verified | Pacific Drums and Percussion |
| Tension rods | True Pitch | verified | Pacific Drums and Percussion |
| Character | Lower tone from a thinner shell, heavy attack, wide tuning range | verified | Pacific Drums and Percussion |

## Thin brass is a deliberate choice

PDP's own wording is worth quoting back: a lower tone from a thinner shell. That is the correct
mechanism and the opposite of the intuition most players start with.

A thick shell reflects the head's energy back quickly and raises the pitch; a thin one flexes,
takes longer to return the energy, and lets the drum sit lower. At 1.2mm this brass shell moves,
and the fundamental drops accordingly.

## The wide tuning range

Two beads on a thin shell is what makes the range possible. A plain 1.2mm cylinder tuned high
starts to go out of round; the beads hold it and let the drum climb without losing its centre.

Downwards it stays warm rather than turning to a flap, which is where thin brass has the advantage
over thin steel.

## The brushed surface

Brushed rather than polished brass is a practical finish as well as a look: it hides handling
marks and it does not need the lacquer that a mirror polish requires. It will still darken over
the years where hands touch it.

## Sources

1. PDP Concept Brushed Brass Snare, 6.5x14 — Pacific Drums and Percussion (tier 1) https://www.pacificdrums.com/products/pdsn6514nbbc-concept-brushed-brass-snare-6-5x14/

---
Source: https://thedrumatlas.com/snare-drums/pdp-concept-brushed-brass · Values marked "unverified" are editorial knowledge awaiting a source.
