---
title: "Lignum Steam Bent Snare"
brand: "Lignum Drums"
category: "Snare drum"
url: "https://thedrumatlas.com/snare-drums/lignum-steam-bent-snare"
updated: "2026-10-08"
reviewed: "no"
---

# Lignum Steam Bent Snare

Lignum's steam bent snare is a single-ply shell bent round with steam rather than cut into staves. The point of the change is thickness: bending lets the shell go far thinner than a stave shell can be worked to. Built in 14 inches at 5, 5.5 and 6.5 deep, in a long list of woods, with generic hardware or Lignum's own in chrome or solid brass.

**Sizes:** 14 × 5 in, 14 × 5.5 in, 14 × 6.5 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Construction | Single-ply steam bent | verified | Lignum Drums |
| Shell woods | Walnut, cherry, ash, oak, beech, birch, sycamore maple, mahogany, purpleheart, makoré, lacewood and yew, among others | verified | Lignum Drums |
| Hardware | Generic, or Lignum's own made in-house | verified | Lignum Drums |
| Hardware finish | Chrome or pure brass | verified | Lignum Drums |
| Made in | Belgium | verified | Lignum Drums |

## Why bend a shell that could be staved

Lignum built stave shells for more than twenty years before adding steam bending, and the reason given for the change is specific rather than romantic: **a bent shell can be made much thinner than a staved one**.

A stave shell starts as a ring of blocks glued edge to edge and is then turned down inside and out. How thin it can go is limited by what the glue joints will tolerate and by how much material has to be left for the turning to stay true. A steam-bent shell starts as a single board already close to its final thickness, so there is no joint running the height of the shell to work around.

Thinner shell, less mass to move, more of the head's energy left in the drum. That is the whole argument.

## The woods

The gallery runs much wider than the usual maple and birch: walnut and white walnut, black cherry, ash, tiger oak, beech, fiddleback sycamore maple, ice birch, quilted mahogany, purpleheart, makoré, lacewood and taxus. Sizes shown are 14 inch, at 5, 5½ and 6½ deep.

## Hardware

Two routes. Standard generic fittings, or hardware Lignum makes itself, in chrome or **pure brass** — on the brass drums, down to the lugs and hoops.

## Sources

1. Steam Bent Snares — Lignum Drums (tier 1) https://www.lignumdrums.com/steam-bent-snares/
2. About Lignum Drums — Lignum Drums (tier 1) https://www.lignumdrums.com/about-lignum-drums/

---
Source: https://thedrumatlas.com/snare-drums/lignum-steam-bent-snare · Values marked "unverified" are editorial knowledge awaiting a source.
