---
title: "INDe Kalamazoo Series Snare"
brand: "Independent Drum Lab"
category: "Snare drum"
url: "https://thedrumatlas.com/snare-drums/inde-kalamazoo-series-snare"
updated: "2026-09-24"
reviewed: "no"
---

# INDe Kalamazoo Series Snare

Hand-rolled and riveted metal shells in aluminium or brass, carrying INDe's patented Infinite Snare Bed. Seven sizes are offered, from a 3.75 by 13 in through to an 8 by 14 and a 5.5 by 15 in. Built up with the shop's low-mass lugs and the SB1 strainer, in a brushed and lacquered finish.

**Sizes:** 13 × 6.5 in, 14 × 5.5 in, 14 × 6.5 in, 14 × 8 in, 15 × 5.5 in, 13 × 3.75 in, 14 × 3.75 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Shell material | Buyer's choice — aluminium or brass | verified | Independent Drum Lab |
| Construction | Hand-rolled and riveted shell | verified | Independent Drum Lab |
| Snare bed | Infinite Snare Bed, US patent 10,699,682 | verified | Independent Drum Lab |
| Lugs | INDe low-mass | verified | Independent Drum Lab |
| Strainer | INDe SB1 | verified | Independent Drum Lab |
| Finish | Brushed and lacquered | verified | Independent Drum Lab |
| Made in | United States — Kalamazoo, Michigan | verified | Independent Drum Lab |

## Rolled and riveted, not welded

A metal snare shell is usually welded and the seam ground away, or spun seamlessly from a disc.
INDe rolls these by hand and rivets the seam, which is how metal drums were made before welding
became routine. A riveted lap joint leaves a slight discontinuity in the shell, and that is not an
accident — it changes how the shell rings.

## The patented part

The Infinite Snare Bed is the shop's own geometry, covered by US patent 10,699,682, and INDe makes
a specific claim for it: an unusually wide tuning range, with snare response and sensitivity held
across it. The bed is where a snare drum either works at extremes or stops working, so a maker
putting its patent there rather than in a throw-off is a meaningful choice.

## A wide size list

Seven sizes are catalogued, including two piccolos at 3.75 in and a 15 in drum — sizes that only
make sense if the shell design really does hold up away from the 14 by 5.5 in centre of the market.
Fitted with the low-mass INDe lugs and the SB1 strainer throughout.

## Sources

1. Kalamazoo Series Snare Drums — Independent Drum Lab (tier 1) https://www.indedrum.com/snare-drums/kalamazoo-series

---
Source: https://thedrumatlas.com/snare-drums/inde-kalamazoo-series-snare · Values marked "unverified" are editorial knowledge awaiting a source.
