---
title: "Gretsch USA Custom Hammered Chrome Over Brass"
brand: "Gretsch"
category: "Snare drum"
url: "https://thedrumatlas.com/snare-drums/gretsch-usa-custom-hammered-cob"
updated: "2026-09-11"
reviewed: "yes"
---

# Gretsch USA Custom Hammered Chrome Over Brass

The Gretsch USA Custom Hammered Chrome Over Brass (G4164HB) is a 14-inch snare drum on a large-hammered 1.2mm chrome-plated brass shell with 4mm die-cast hoops and 42-strand wires. The hammering breaks up the shell's overtones, giving a drier voice than Gretsch's smooth chrome-over-brass.

**Sizes:** 14 × 5 in, 14 × 6.5 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Shell material | Brass, chrome-plated | verified | Memphis Drum Shop |
| Shell thickness | 1.2 mm | verified | Memphis Drum Shop |
| Hammering | Large-pattern, hand-applied | verified | Memphis Drum Shop |
| Bearing edge | 45° | verified | Memphis Drum Shop |
| Lugs | 10 | verified | Memphis Drum Shop |
| Hoops | 4mm die-cast | verified | Memphis Drum Shop |
| Throw-off | Lightning | verified | Memphis Drum Shop |
| Butt plate | Adjustable | verified | Memphis Drum Shop |
| Snare wires | 42-strand | verified | Memphis Drum Shop |
| Model | G4164HB (14 × 6.5); G4160HB (14 × 5) | verified | Memphis Drum Shop |

## What hammering does to a metal shell

A smooth metal shell is a uniform cylinder, and uniform cylinders ring at predictable frequencies
with long, coherent sustain. That ring is why a plain brass snare is bright and lively — and why
it can also be difficult to control.

Hammering deforms the surface into hundreds of small irregular curves. No two regions of the shell
are quite the same shape any more, so the overtones no longer line up and reinforce each other.
They decay faster and interfere with one another instead.

The result is a drier drum with a shorter tail and a more focused fundamental. Gretsch's own
description — "slightly drier" than their smooth chrome-over-brass — is a fair summary, and this
is the same mechanism that makes a hand-hammered cymbal more complex than a machine-hammered one.

## The 42 wires

Most snare drums use 16 to 20 strands. This one uses 42.

More wires across the head means a denser, faster, more uniform response — the snare sound becomes
a sheet rather than a set of individual strands, with very short ghost notes coming through
cleanly. It also means more contact with the resonant head, so the drum is a little more damped
and the sensitivity at very low volume is high.

Combined with the hammering, this is a deliberately controlled drum. Nothing about it is loose.

## The die-cast hoops

At 4mm these are heavy even by die-cast standards. A die-cast hoop is a single poured piece rather
than a bent strip of steel, so it is far more rigid, and it clamps the head's edge much more
firmly.

That gives a more focused sound with fewer overtones, a harder and more concentrated rimshot, and
noticeably more consistent tuning — the head is held more evenly around its circumference.

The trade is that die-cast hoops damp the head slightly and cost more. They also hurt more when
you catch one.

## Where it fits

This is a studio and stage drum for players who want brass weight and projection without brass
unruliness. Against a Black Beauty it is drier and more controlled; against a Supraphonic it is
darker, heavier and considerably more expensive.

If you already own a bright, ringing metal snare and want the other end of the metal range without
going to wood, this is the drum.

## Sources

1. USA Custom Metal snares — Gretsch Drums (tier 1) https://gretschdrums.com/snares/usa-custom-metal
2. Gretsch 14×6.5 USA Custom Hammered Chrome Over Brass Snare Drum (G4164HB) — Memphis Drum Shop (tier 2) https://memphisdrumshop.com/products/gretsch-14x65-usa-custom-hammered-chrome-over-brass-snare-drum-g4164hb

---
Source: https://thedrumatlas.com/snare-drums/gretsch-usa-custom-hammered-cob · Values marked "unverified" are editorial knowledge awaiting a source.
