---
title: "DW Collector's Series Stainless Steel"
brand: "DW"
category: "Snare drum"
url: "https://thedrumatlas.com/snare-drums/dw-collectors-stainless-steel"
updated: "2026-09-24"
reviewed: "no"
---

# DW Collector's Series Stainless Steel

The DW Collector's Series Stainless Steel is a rolled stainless steel snare drum built in 4.5, 5.5 and 6.5-inch depths at 14 inches, with chrome-plated triple-flanged True-Hoops, Collector's Series turret lugs, True-Pitch tension rods and the MAG throw-off with a five-position butt plate.

**Sizes:** 14 × 4.5 in, 14 × 5.5 in, 14 × 6.5 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Part numbers | DCMS14514SCX717, DCMS15514SCX717, DCMS16514SCX717 | verified | Drum Workshop |
| Shell material | Rolled stainless steel | verified | Drum Workshop |
| Lugs | Collector's Series turret lugs | verified | Drum Workshop |
| Hoops | Chrome-plated triple-flanged True-Hoops | verified | Drum Workshop |
| Throw-off | MAG throw-off with five-position butt plate | verified | Drum Workshop |
| Tension rods | True-Pitch | verified | Drum Workshop |
| Made in | United States | verified | Drum Workshop |

## The lighter metal drum

DW's own framing of this shell is that it is light — a rolled stainless cylinder rather than a
thick cast or heavy-gauge one. That matters because stainless is already a hard, bright metal, and
adding mass to it produces a drum that is loud in a way most rooms cannot use.

Kept thin, it stays fast and articulate, with a clean high end and a rimshot that cuts without
becoming a crash.

## No plating to fail

Stainless needs no chrome over it, so the shell has one fewer layer than a plated steel drum. That
is a durability argument rather than an acoustic one — plating on a snare shell eventually chips
at the edges and around the lug holes — but it is a real one on a drum meant to last decades.

## Three depths

4.5 inches is unusually shallow for a Collector's metal drum and reads almost as a piccolo:
very high, very quick. 5.5 is the standard all-rounder. 6.5 adds the low end that stainless
otherwise lacks and is the one most likely to work as a single main snare.

Triple-flanged hoops rather than cast ones keep the drum open, which on this material is a
sensible pairing.

## Sources

1. Collector's Stainless Steel Snare Drum 6.5x14 — Drum Workshop (tier 1) https://www.dwdrums.com/products/dcms16514scx717-collector-s-stainless-steel-snare-drum-6-5x14/

---
Source: https://thedrumatlas.com/snare-drums/dw-collectors-stainless-steel · Values marked "unverified" are editorial knowledge awaiting a source.
