---
title: "Trick Pro1-V BigFoot"
brand: "Trick"
category: "Pedal"
url: "https://thedrumatlas.com/pedals/trick-pro1v-bigfoot"
updated: "2026-09-11"
reviewed: "yes"
---

# Trick Pro1-V BigFoot

The Trick Pro1-V BigFoot is a 1:1 direct-drive pedal machined from aerospace materials, with an internally housed compression spring and a base plate certified to withstand over 12,000 PSI. Spring tension adjusts with a dial while you are playing.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Drive | Direct, 1:1 ratio — chainless | verified | Trick Drums U.S.A. |
| Materials | Titanium, billet aluminium, stainless and hardened steel | verified | Trick Drums U.S.A. |
| Housing | US-made machined aluminium | verified | Guitar Center |
| Footboard | Longboard | verified | Trick Drums U.S.A. |
| Base plate | Machined from solid billet aluminium | verified | Trick Drums U.S.A. |
| Base plate rating | Certified above 12,000 PSI tensile strength | verified | Trick Drums U.S.A. |
| Spring | Internally housed compression spring | verified | Trick Drums U.S.A. |
| Spring adjustment | Dial at the top of the housing, adjustable while playing | verified | Trick Drums U.S.A. |
| Stroke adjustment | Three-position cluster — footboard angle, pedal action and throw set separately | verified | Trick Drums U.S.A. |
| Low Mass option | Footboard milled out by 7 oz per board | verified | Sweetwater |

## A compression spring, inside the housing

Nearly every pedal in this catalogue uses an **extension** spring hanging on the outside of the
frame, stretched as the footboard goes down and pulling it back up. The Trick uses a
**compression** spring housed inside the mechanism, squeezed rather than stretched.

Ludwig did the same thing on the Speed King in the 1930s, and the Trick arrives at it for the same
reason: a compression spring in a housing is constrained on all sides, so it cannot whip, flex
sideways or oscillate the way a hanging extension spring does. It cycles faster and returns energy
more predictably.

The Speed King's version of this is also why that pedal squeaks — an enclosed spring is hard to
lubricate. Ninety years of manufacturing later, Trick gets the same mechanical advantage without
the maintenance problem.

## Spring tension while you play

A dial at the top of the housing, turnable mid-performance.

This sounds like a convenience and is closer to a design philosophy. Spring tension is the single
most consequential setting on any pedal and the one most dependent on context — the drum, the
beater, the tempo, how tired your leg is in the third set.

Every other pedal here makes you stop, find a key or a wingnut, guess, and play again to check.
Being able to turn a dial and hear the result immediately is a different way of working.

## 12,000 PSI

Trick publishes a **tensile strength certification** for the base plate. No other pedal maker in
this catalogue publishes a materials figure of any kind.

Whether a drummer can generate forces approaching that is not the point — they cannot. The number
tells you what kind of company this is: one that specifies parts the way an aerospace supplier
does, and then prints the specification because it has one.

It is also a fair proxy for rigidity. A base plate that does not flex under load keeps the geometry
between hinge, drive and beater constant through the stroke, which is exactly what a direct-drive
pedal needs.

## The Low Mass option

Seven ounces milled out of the underside of each footboard — close to half the weight of the
previous BigFoot board.

Footboard mass matters more on a direct-drive pedal than elsewhere. With no chain to absorb
anything, the board's inertia is directly in series with your foot: a heavy board resists starting
and resists stopping, which blunts exactly the immediacy the pedal exists to provide.

Removing mass from the board while keeping it rigid is a machining problem, and it is the sort of
problem this company is set up to solve.

## Against the Axis

The two machined direct-drive pedals in the catalogue, and they differ more in philosophy than in
performance.

**Axis** exposes geometry as adjustments — the Variable Drive Lever changes leverage, the beater
angle is fixed at 21 degrees by design.

**Trick** exposes everything else — footboard angle, pedal action and throw on a three-position
cluster, spring tension on a live dial.

Both are extremely fast, both are unforgiving, and both cost several times what a chain pedal does.
Which suits you is a question of whether you want to set a pedal up once or keep tuning it.

## Sources

1. Pro1-V BigFoot Low Mass Direct Drive Single — Trick Drums U.S.A. (tier 1) https://trickdrums.com/product/pro1-v-bigfoot-low-mass-direct-drive-single/
2. Trick Drums P1VBFLM2 Pro1-V Bigfoot Low Mass Double Bass Drum Pedal — Sweetwater (tier 2) https://www.sweetwater.com/store/detail/P1VBFLM2--trick-drums-pro1-v-bigfoot-low-mass-double-pedal
3. Trick Pro1-V BigFoot Direct Drive Double Bass Drum Pedal — Guitar Center (tier 2) https://www.guitarcenter.com/Trick/Pro1-V-BigFoot-Direct-Drive-Double-Bass-Drum-Pedal.gc

---
Source: https://thedrumatlas.com/pedals/trick-pro1v-bigfoot · Values marked "unverified" are editorial knowledge awaiting a source.
