---
title: "Tama Speed Cobra 310"
brand: "Tama"
category: "Pedal"
url: "https://thedrumatlas.com/pedals/tama-speed-cobra-310"
updated: "2026-09-24"
reviewed: "no"
---

# Tama Speed Cobra 310

The Tama HP310L is the affordable Speed Cobra, built on the same design principles as the 910 and carrying the same extended footboard. Tama's Recessed Setting positions that board to widen the angle between the foot's force and the chain's pull, which lightens the action. Models HP310L single, HP310LW twin.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Configuration | Single (HP310L) or twin (HP310LW) | verified | Tama |
| Drive | Chain | verified | Tama |
| Footboard | Long — the Speed Cobra board, longer than the Iron Cobra's, with a smoother playing surface | verified | Tama |
| Footboard placement | Recessed Setting, US Patent 8,269,089 — widens the angle between footboard force and chain pull to lighten the action | verified | Tama |

## The long footboard, and what length does

A longer board is a longer lever. Your foot sits further from the pivot, so the same push moves
the beater through the same arc with less force — and the board's tip travels further for the same
ankle movement, which is what makes the beater accelerate hard at the end of the stroke.

The two techniques the length exists for are heel-toe and sliding. Both need somewhere to put the
foot other than the one spot a short board offers: heel-toe rocks between two contact points along
the board, and a slide starts near the heel and runs forward. A short board has no room for either.

Tama also smooths the surface rather than texturing it, which is the second half of the same
thought: a slide technique needs the shoe to move on the board, and knurling is designed to stop
exactly that.

## The Recessed Setting

This is the part that separates a Speed Cobra from a long-boarded Iron Cobra, and Tama explains it
in terms of forces rather than feel.

Two forces act at the sprocket: F1, the force you put into the footboard, and F2, the force pulling
the chain. The angle between them sets how much F1 is needed for a given F2. Widen the angle and
the same chain tension is achieved with less effort at the foot.

Setting the footboard back into a recessed position is how that angle is widened. The result is a
lighter action for the same drive — which matters most in exactly the passages the pedal is named
for, where fatigue arrives before the notes run out.

## 310 against 910

Tama is straightforward that the 310 was developed from the 910's principles at a lower price,
and the footboard is described as the same design.

What separates the ranges is the hardware underneath — the bearings, frame width, spring
mechanism and case that the 900-series pedals carry. Those are the parts that show up over years
of use rather than in the first hour.

For a player who wants to find out whether a long board suits their feet before committing to a
flagship, that is a useful place for a price break to fall.

## Sources

1. Speed Cobra 310 Single Pedal HP310L — Tama (tier 1) https://www.tama.com/usa/products/detail/hp310l.html

---
Source: https://thedrumatlas.com/pedals/tama-speed-cobra-310 · Values marked "unverified" are editorial knowledge awaiting a source.
