---
title: "Tama Iron Cobra 900 Power Glide"
brand: "Tama"
category: "Pedal"
url: "https://thedrumatlas.com/pedals/tama-iron-cobra-900-power-glide"
updated: "2026-09-11"
reviewed: "yes"
---

# Tama Iron Cobra 900 Power Glide

The Tama Iron Cobra 900 Power Glide is a double-chain-drive bass pedal built around an offset Power Glide cam, which accelerates the beater through the second half of the stroke. It runs on Oiles bearings rather than ball bearings, uses a 6mm beater shaft, and is the reference point most other pedals get compared against. Model HP900PN single, HP900PWN double.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Configuration | Single (HP900PN) or double (HP900PWN) | verified | Tama |
| Drive | Double chain | verified | Tama |
| Cam | Power Glide LiteSprocket — offset | verified | Tama |
| Cam action | Increases beater power and speed toward the end of the stroke | verified | Tama |
| Bearings | Oiles — lower friction than ball bearings, no side-to-side play | verified | Tama |
| Beater | Power-Strike Cobra, felt, 6mm steel shaft | verified | Tama |
| Heel hinge | Three-piece Hinge Guard Block; lengthens the footboard for leverage | verified | Tama |
| Spring | Cobra Coil — secondary steel return spring | verified | Tama |

## Power Glide vs Rolling Glide

Tama sells the same pedal with two different cams, and the choice matters more than anything else
on the spec sheet.

**Power Glide** is offset — the cam is not round, so the leverage changes as the footboard travels.
It starts light and accelerates hard through the back half of the stroke. You get more power for
the same effort, at the cost of a slightly less predictable feel.

**Rolling Glide** is round. Constant leverage, constant feel, entirely linear. Slower to build
power, easier to place precisely.

Neither is better. Power Glide suits players who want the pedal to help; Rolling Glide suits
players who want it to stay out of the way. If you cannot try both, Power Glide is the more
popular choice by a wide margin.

## Why the bearings are worth mentioning

Most pedals run on ball bearings. Tama uses Oiles bushings — a self-lubricating material rather
than rolling elements. In practice that means less friction at the hinge and, more usefully,
no side-to-side slop as the pedal wears.

That second part is what makes an old Iron Cobra still feel tight. It is the single most common
reason players cite for buying another one after ten years with the first.

## Setup notes

- **Spring tension is the most over-adjusted thing on the pedal.** Set it to the lightest tension
  that returns the beater fully, then stop.
- **The beater height changes everything.** Raising it slows the pedal and adds power; lowering it
  does the reverse. Adjust this before you touch the spring.
- **Check the hoop clamp before blaming the pedal.** A loose clamp presents as lost power, not as
  an obviously loose part.

## Sources

1. Iron Cobra 900 Single Pedal Power Glide — HP900PN — Tama (tier 1) https://www.tama.com/eu/products/detail/hp900pn.html
2. Tama Iron Cobra 900 Power Glide — Sweetwater (tier 2) https://www.sweetwater.com/store/detail/HP900PWNMR--tama-iron-cobra-900-power-glide-and-mirror-rod-bundle

---
Source: https://thedrumatlas.com/pedals/tama-iron-cobra-900-power-glide · Values marked "unverified" are editorial knowledge awaiting a source.
