---
title: "DW 5000HL Heel-Less Pedal"
brand: "DW"
category: "Pedal"
url: "https://thedrumatlas.com/pedals/dw-5000hl-heelless-pedal"
updated: "2026-09-24"
reviewed: "no"
---

# DW 5000HL Heel-Less Pedal

The DW 5000HL is a 5000 Series bass pedal without a heel plate: a unique base plate with an integrated Delta ball-bearing hinge carries a slightly truncated footboard that meets the floor directly. It keeps the dual-chain Accelerator cam, dual spring rocker and Tri-Pivot toe clamp. Developed with educator Mike Packer.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Configuration | Single (DWCP5000HL) or double (DWCP5002HL) | verified | Drum Workshop |
| Drive | Dual chain, Accelerator | verified | Drum Workshop |
| Cam | Accelerator | verified | Drum Workshop |
| Footboard | Heel-less — truncated board meeting the floor, no heel plate | verified | Drum Workshop |
| Heel hinge | Delta ball-bearing hinge integrated into the base plate, US Patent 5431081 | verified | Drum Workshop |
| Spring | Dual-bearing spring rocker | verified | Drum Workshop |
| Hoop clamp | Tri-Pivot toe clamp, side-adjusting | verified | Drum Workshop |

## What the heel plate was doing

On a conventional pedal the footboard hinges off a raised heel plate, so the board sits at an
angle above the floor even at rest and your heel rests on metal.

Take the plate away and the board's lower end comes down to the floor itself. The board gets
shorter, the resting angle gets shallower, and the heel of your foot lands on the ground rather
than on the pedal.

## Who that suits

Heel-up players — the majority in loud music — already spend the whole gig with the heel off the
board. For them the heel plate is a platform they never use, carrying height they would rather
not have.

Lowering the board lowers the whole pivot geometry. The ankle works through a smaller arc, the
foot sits flatter, and the leg is doing more of its work from the hip. Players who get calf
fatigue from a steeply angled board often find that changes first.

Heel-down playing is still possible; the heel simply meets the floor instead of the pedal, which
is a different feel and takes some acclimatising.

## What it keeps from the 5000

Everything in the drivetrain. Dual-chain Accelerator cam — the eccentric sprocket that shortens
the stroke and raises footboard velocity through it. Dual-bearing spring rocker, so the spring
follows the stroke instead of fighting across it. Tri-Pivot toe clamp, with three self-aligning
rubber pads that grip a hoop of any thickness from above and below.

This is a 5000 pedal with a different relationship to the floor, not a different pedal. If you
know how a 5000 responds, you know how this responds — from a lower starting point.

## The base plate is the design

Removing a heel plate sounds like subtraction, and it is not: the hinge has to go somewhere, and
here it is integrated into a purpose-made base plate rather than bolted to a riser.

That is also why it is not a modification you make to a standard 5000. The pivot, the board length
and the plate are one design, developed with Los Angeles educator Mike Packer, and it works
because all three moved together.

## Sources

1. DW 5000 Series Heelless Bass Pedal — DWCP5000HL — Drum Workshop (tier 1) https://www.dwdrums.com/products/dwcp5000hl-5000-series-heelless-bass-pedal/

---
Source: https://thedrumatlas.com/pedals/dw-5000hl-heelless-pedal · Values marked "unverified" are editorial knowledge awaiting a source.
