---
title: "Axis Shortboard A-CAM"
brand: "Axis"
category: "Pedal"
url: "https://thedrumatlas.com/pedals/axis-shortboard-a-cam"
updated: "2026-09-24"
reviewed: "no"
---

# Axis Shortboard A-CAM

The Axis Shortboard is the company's traditional-length direct-drive pedal, with a footboard 10 inches long and 3.5 wide and a 1.5-inch heel plate that mounts in two positions. The A-CAM carries Axis's patented Variable Drive Lever, which sets footboard angle independently of beater angle. In the line since 1990.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Drive | Direct | verified | Axis Percussion |
| Cam | A-CAM, with patented Variable Drive Lever | verified | Axis Percussion |
| Footboard | 10 in long, 3.5 in wide at the logo | verified | Axis Percussion |
| Heel plate | 1.5 in long, with two mounting positions | verified | Axis Percussion |
| Material | Aerospace-grade aluminium, precision machined | verified | Axis Percussion |
| Bearings | Stainless steel at every pivot | verified | Axis Percussion |
| Spring | Standard medium-duty assembly with thumb nuts, or the MicroTune tensioner | verified | Axis Percussion |

## The board Axis is not famous for

Axis built its reputation on the Longboard, and on the players — mostly in metal — who needed a
12-inch board to slide and heel-toe along.

The Shortboard is the same pedal at conventional length: 10 inches, which is close to what a
Tama or DW board measures. Axis's own framing names jazz, rock and hard rock, and heel-down
playing specifically.

That last point is the one worth dwelling on. Heel-down technique keeps the foot flat on the
board and works from the ankle, and a long board makes that harder rather than easier — the
further the toe is from the pivot, the more the ankle has to travel to produce the same beater
motion. A short board is the correct geometry for a heel-down player, and it is available here
with direct drive, which is a rare combination.

## The Variable Drive Lever

Axis's patented adjustment, and the thing the A-CAM has that the simpler X-CAM does not.

It sets footboard angle independently of beater angle. On any other pedal those are coupled: lift
the board and the beater moves back with it.

What decoupling them actually changes is how much board travel it takes to swing the beater
through its arc. Steepen the board without moving the beater and you have a longer foot movement
for the same stroke — slower, more controlled, more room to shade a note. Flatten it and the same
stroke happens in less travel — faster, more immediate.

Axis is explicit that small VDL changes produce noticeable differences, which is worth knowing
before you start: this is an adjustment to make in eighths of a turn.

## The two heel-plate positions

The heel plate is 1.5 inches long and bolts on in either of two places.

Moving it changes where the hinge sits relative to your heel, which changes the effective length
of the board under your foot and the angle at which it starts. It is a coarse companion to the
VDL's fine adjustment, and between them the pedal's geometry is genuinely configurable rather than
merely adjustable.

## Machined aluminium, bearings everywhere

Axis pedals are cut from aerospace-grade aluminium rather than cast, and every pivot runs on
stainless steel bearings.

On a direct-drive pedal that is not a luxury. With no chain to absorb anything, every bit of
friction and every thousandth of play in a pivot reaches the foot. A bushing that a chain pedal
would tolerate would be audible here as vagueness.

Stainless rather than plain steel is the detail underneath the detail: a pedal lives in a damp
case on a floor, and a rusted bearing is a pedal with a rough spot in its stroke.

## Sources

1. AXiS Shortboard A-CAM Single Pedal — Axis Percussion (tier 1) https://axispdc.com/products/axis-shortboard-a-cam-single-pedal

---
Source: https://thedrumatlas.com/pedals/axis-shortboard-a-cam · Values marked "unverified" are editorial knowledge awaiting a source.
