---
title: "Yamaha HEXRACK II"
brand: "Yamaha"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/yamaha-hexrack-ii"
updated: "2026-09-24"
reviewed: "no"
---

# Yamaha HEXRACK II

The Yamaha HEXRACK II is an aluminium-alloy drum rack built on hexagonal tubing, sold as a two-leg base set (HXR2LII) that extends to three legs with the HXREXII. Its clamps take tubes from 15 to 34 mm, round or hex, and the system is compatible with the original HEXRACK.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Drum rack | verified | Yamaha |
| Material | Aluminium alloy | verified | Yamaha |
| Tubing | Hexagonal and round | verified | Yamaha |
| Configuration | HXR2LII two-leg base set; HXREXII adds a third leg | verified | Yamaha |
| Arm clamp | HXACII — secures tubes from 15 to 34 mm, including hexagonal | verified | Yamaha |
| Compatibility | Yamaha System Hardware; backward compatible with the original HEXRACK | verified | Yamaha |

## Why hexagonal tube

Every other drum rack uses round tube, and round tube has one structural nuisance: a clamp on it
can rotate.

Do a clamp up hard enough and friction holds. Do it up in a hurry, or let it work loose over an
evening's vibration, and the arm creeps around the tube — which on a cymbal arm means the cymbal
slowly changes angle, and on a tom means the drum tilts away from the stick.

A hexagonal section cannot rotate inside a matching clamp. The flats key against each other, so
the clamp's job reduces to stopping the arm sliding along the tube, which is a much easier thing
for a fastener to do. Setup becomes repeatable in a way round tube has to be persuaded into.

## Aluminium alloy, and what Yamaha changed

The original HEXRACK made the hexagonal argument. The second generation was rebuilt from a clean
slate around a new aluminium alloy, chosen for strength well beyond the first system's while
staying light.

That combination is the whole point of the redesign. Racks have historically been the heavy option
— a steel frame in place of several steel tripods, with the frame usually winning on floor space
and losing on weight. An aluminium rack turns that around: the space saving stays, and the load-in
gets lighter rather than heavier.

## Two legs, then three

The HXR2LII base set is two legs. Add the HXREXII and it becomes a three-leg rack.

Buying a rack in stages is unusual and sensible. A four-piece kit needs less structure than a
seven-piece, and a player whose kit grows can extend the frame instead of replacing it — which is
the promise every modular system makes and not all of them keep.

## The clamp that takes anything

The HXACII arm clamp handles tubes from 15 mm to 34 mm, round or hexagonal, on an extended arm.

That range covers essentially all drum hardware: 9.5 mm and 12.7 mm arms sit in their own
receivers, and 15 to 34 mm spans thin cymbal stand uppers through heavy rack tube. A rack whose
clamps only fit its own tubing is a closed system; one that clamps anything is a frame you can
hang a twenty-year-old cymbal stand off.

## Backward compatibility

The second-generation system works with the original HEXRACK's parts.

For an owner of the first system that is the difference between an upgrade and a replacement. It
is also a statement about how long Yamaha expects the tubing to last — a rack tube has nothing to
wear out, and a company willing to keep the interface fixed is one that expects you to still own
it in twenty years.

## Sources

1. HEXRACK II — Features — Yamaha (tier 1) https://usa.yamaha.com/products/musical_instruments/drums/ac_drums/hardware/hexrack_ii/index.html

---
Source: https://thedrumatlas.com/hardware/yamaha-hexrack-ii · Values marked "unverified" are editorial knowledge awaiting a source.
