---
title: "Yamaha DS-950 Drum Throne"
brand: "Yamaha"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/yamaha-ds950-throne"
updated: "2026-09-24"
reviewed: "no"
---

# Yamaha DS-950 Drum Throne

The Yamaha DS-950 is a heavyweight drum throne with a large square bench seat, 480 mm wide by 390 deep, on a large aluminium die-cast seat mount. It stands on four double-braced wide-stance legs and adjusts on a screw rod between 460 and 650 mm.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Drum throne | verified | Yamaha |
| Seat | Large square bench, 480 mm wide by 390 mm deep | verified | Yamaha |
| Seat mount | Large aluminium die-cast | verified | Yamaha |
| Legs | Four, double braced, wide stance | verified | Yamaha |
| Height range | 460–650 mm | verified | Yamaha |
| Height adjustment | Screw rod | verified | Yamaha |

## A square seat is a different instrument

Nearly every drum throne is round, and the DS-950 is not: 480 mm across by 390 deep, flat, like a
piano bench.

Round tops are symmetrical, so there is no wrong facing and no wrong position. That is a virtue
when you move around the throne and a liability when you want to sit in the same place every time —
there is nothing on a round seat that tells you where the middle is.

A square bench has edges, and edges give you a reference. You sit square to the kit because the
seat is square to the kit. For a player working a double pedal, where the hips need to stay put
while both legs work independently, that reference is worth something real.

It is also a wider seat than almost any round top, front to back as well as side to side, so there
is room to shift forward for the hi-hat and back for a floor tom without leaving the seat.

## Four legs, wide stance, double braced

Three specifications that all say the same thing: this throne is built not to move.

Four legs give a wider base for the same collapsed size than three. A wide stance pushes the feet
further from the centre, which increases the moment required to tip it. Double bracing triangulates
each leg so a sideways knock deflects rather than folds.

A tripod is still the easier thing on an uneven floor — three points always sit flat. What this
base buys is that a heavy player driving two pedals from a wide seat does not walk the throne
across the riser over a set.

## The die-cast seat mount

The joint between seat and post is where thrones go loose, and it is the one nobody inspects
before buying.

Die casting produces a single dense part rather than an assembly of stampings. On a large square
seat the mount is carrying a cantilever — your weight is frequently not over the post, because a
bench invites you to sit toward an edge — so the mount is under bending load in normal use, not
just compression.

Yamaha uses the large die-cast mount on both the DS-840 and this throne, and the seat is what
differs between them.

## The screw rod

Height is set by thread, not by a clamp. The load sits on the thread, so it cannot creep down
under a set, and the height you set is repeatable to the turn.

Yamaha's cheaper DS-750 uses a clamp rod instead and covers a slightly wider range at the bottom
(430 mm against 460). That is the honest trade between the two: a little more range and a faster
adjustment against a height that never moves.

## Sources

1. Drum Thrones — Specs (DS-750, DS-840, DS-950) — Yamaha (tier 1) https://usa.yamaha.com/products/musical_instruments/drums/ac_drums/hardware/stools/specs.html
2. Drum Thrones — Overview — Yamaha (tier 1) https://usa.yamaha.com/products/musical_instruments/drums/ac_drums/hardware/stools/index.html

---
Source: https://thedrumatlas.com/hardware/yamaha-ds950-throne · Values marked "unverified" are editorial knowledge awaiting a source.
