---
title: "Tune-bot Gig"
brand: "Tune-bot"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/tune-bot-gig"
updated: "2026-09-24"
reviewed: "no"
---

# Tune-bot Gig

The Gig is Tune-bot's middle tuner: the same clip-on measurement engine as the Studio, reading 30 to 400Hz and C1 to G4 to ±0.5Hz in 750 milliseconds, with absolute and difference modes on a single-colour LCD. It runs on two AAA cells in the same 3.94 by 2.36 by 2.17 inch body.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Clip-on electronic drum tuner | verified | Overtone Labs |
| Frequency range | 30–400 Hz, C1 to G4 | verified | Overtone Labs |
| Resolution | ±0.5 Hz | verified | Overtone Labs |
| Response time | 750 milliseconds | verified | Overtone Labs |
| Modes | Absolute and difference | verified | Overtone Labs |
| Display | Single-colour LCD | verified | Overtone Labs |
| Dimensions | 3.94 × 2.36 × 2.17 in | verified | Overtone Labs |
| Power | Two AAA cells | verified | Overtone Labs |
| Position in range | Between the Original and the Studio | verified | Overtone Labs |

## The same numbers

The specification worth leading with is the one the Gig shares with the Studio rather than the one it
does not.

**±0.5Hz resolution. 750 millisecond response. 30 to 400Hz, C1 to G4.** Those figures are identical
across the two models, which means the Gig measures a drumhead exactly as accurately as the top of the
range does.

What it leaves out is the interface around that measurement: a single-colour display instead of four,
no memory, and no filter mode.

## Absolute and difference

Two modes, and between them they cover most of what tuning a drum involves.

**Absolute** reports the pitch it hears, in hertz and as a note. That is what you use to put a head at a
target — a snare batter at a figure you know works, a floor tom where you want it.

**Difference** reports the gap between what it is hearing now and a reference you have set. That is the
lug-matching mode: tap one lug, set it as the reference, and work round the hoop watching the deviation
go to zero rather than reading and comparing absolute numbers in your head.

Difference mode is the one that gets used most, and it is the one that makes a drum sit evenly. An
unevenly tensioned head produces beating between its own partials, which is most of what people mean
when they say a drum will not tune.

## Where the filter matters and where it does not

The Studio's filter mode exists because a large drum's fundamental drowns out the local pitch at a lug.

On a 14-inch snare and rack toms, the fundamental and the lug pitch are far enough apart and the drum is
small enough that an unfiltered reading is usually clean. On a 22-inch bass drum or an 18-inch floor tom
it often is not.

So the honest description of the Gig is a tuner that will handle a snare and toms very well and will
make a big bass drum harder work — which, for a great many players, is the right trade at the price.

## In a stick bag

Same body as the Studio, two AAA cells, clips to a hoop.

The physical design is the unglamorous part of why these caught on. A tuner that lives in the bag gets
used; one that needs setting up gets used once. Clipping to the hoop also puts the pickup in contact
with the drum rather than in the air, which is why it works on a noisy stage.

## Sources

1. Compare tune-bot models — Overtone Labs (tier 1) https://tune-bot.com/compare/

---
Source: https://thedrumatlas.com/hardware/tune-bot-gig · Values marked "unverified" are editorial knowledge awaiting a source.
