---
title: "Tama Stage Master Cymbal Stand"
brand: "Tama"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/tama-stage-master-cymbal-stand"
updated: "2026-09-11"
reviewed: "yes"
---

# Tama Stage Master Cymbal Stand

The Tama HC42SN is a single-braced straight cymbal stand with a 25.4mm base tube, a fine-gear tilter and the Quick-Set Cymbal Mate. At 6.6 pounds it is roughly half the weight of a flagship stand, and it holds a cymbal just as well.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Cymbal stand — straight | verified | Tama |
| Base tube | 25.4 mm | verified | Tama |
| Legs | Single braced (HC42SN); double braced as HC42WN | verified | Drum Center of New Hampshire |
| Tilter | Fine gear | verified | Tama |
| Cymbal attachment | Quick-Set Cymbal Mate — one-touch | verified | Tama |
| Couplings | Die-cast | verified | Tama |
| Feet | Rubber | verified | Tama |
| Height range | 690–1420 mm | verified | Tama |
| Weight | 2.9 kg | verified | Tama |

## Single bracing is a choice, not a failure

The catalogue is full of double-braced hardware, and it is easy to read single bracing as the
cheap version. Sometimes it is. Often it is simply the right tool.

A **single-braced** leg has one strut instead of two. It is lighter, it takes up less floor space,
and it folds smaller. What it gives up is resistance to being knocked sideways and the ability to
carry a very heavy cymbal on a long boom without moving.

For a **straight** stand carrying a crash or a hi-hat-height cymbal, there is no boom lever
applying torque, so most of what double bracing defends against does not arise.

At 6.6 pounds against the DW 9700's 12.3, a five-stand setup is thirty pounds lighter. That is one
fewer trip to the car, every gig, forever.

The cymbal sounds identical. Nothing about a stand changes how a cymbal sounds, provided it holds
the cymbal at the angle you set and does not rattle.

## Quick-Set Cymbal Mate

The cymbal attachment, and the most quietly useful thing on the stand.

The conventional arrangement is a threaded rod with a felt washer, a cymbal, another felt washer
and a wingnut — which means unscrewing a wingnut for every cymbal at the end of every gig, and a
wingnut rolling under the riser at least once a year.

The Cymbal Mate attaches and releases **with one touch**. Over a few hundred load-ins it adds up,
and Tama fits it across the range rather than reserving it for expensive hardware.

## Where the money actually went

Comparing this to the Roadpro in the same brand shows what you get for roughly double the price:

| | Stage Master HC42SN | Roadpro HC83BW |
| --- | --- | --- |
| Base tube | 25.4 mm | 28.6 mm |
| Legs | Single braced | Double braced |
| Tilter | Fine gear | Quick-Set friction discs |
| Max height | 1420 mm | 2100 mm |
| Weight | 2.9 kg | 5.0 kg |
| Boom | No | Yes, stows internally |

The tilter is the difference you will notice daily — a fine-gear tilter has small teeth, so the
available angles are close together, but they are still steps. The height difference is the one
that might rule it out: 1420mm is not tall enough to put a ride over a large kit.

## Where it fits

A first set of hardware, a second set for a rehearsal room, or a deliberate lightweight rig for
anyone carrying their own gear.

It is also the honest answer for a player who has been told they need heavy hardware and does not.
If your cymbals are not large, your boom arms are not long, and nobody is knocking into your stands,
single bracing is sufficient — and your back will notice the difference more than your audience
will.

## Sources

1. Stage Master Straight Cymbal Stand HC42WN — Tama (tier 1) https://www.tama.com/usa/products/detail/hc42wn.html
2. Tama HC42SN Stage Master Straight Cymbal Stand — Single Braced Legs — Drum Center of New Hampshire (tier 2) https://drumcenternh.com/products/tama-hc42sn-stage-master-straight-cymbal-stand-single-braced-legs

---
Source: https://thedrumatlas.com/hardware/tama-stage-master-cymbal-stand · Values marked "unverified" are editorial knowledge awaiting a source.
