---
title: "Tama Multi Clamp"
brand: "Tama"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/tama-multi-clamp"
updated: "2026-09-24"
reviewed: "no"
---

# Tama Multi Clamp

Tama's Multi Clamp comes in two forms. The MC61 joins a stand pipe of 15.9 to 28.6 mm to any attachment on a 19.1 mm pipe; the MC62 is a double clamp joining two pipes in that same 15.9 to 28.6 mm range, with the FastClamp quick-setup system on both sides.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Multi clamp | verified | Tama |
| MC61 capacity | Stand pipes 15.9–28.6 mm to attachments on 19.1 mm pipe | verified | Tama |
| MC62 capacity | Two pipes, each 15.9–28.6 mm | verified | Tama |
| Fastening | FastClamp Easy Set-Up System on both sides of the MC62 | verified | Tama |

## Read the two numbers

A multi clamp has two jaws and they do different jobs, which is why the specification has two
figures rather than one.

The **host** side grips whatever you are clamping to — a cymbal stand's tube, a hi-hat column, a
rack bar. Tama's range here is 15.9 to 28.6 mm, which covers essentially everything from a
lightweight stand's upper section to a heavy base tube.

The **guest** side takes what you are hanging on. On the MC61 that is a fixed 19.1 mm, which is
the diameter Tama's own accessory arms, cymbal holders and ratchet arms use.

So the MC61 is a clamp for putting Tama attachments on any stand. The MC62 is two host jaws back
to back: it joins pipe to pipe, which is what you need when the thing you are adding is itself a
stand section rather than an accessory.

## Why these are the most-bought hardware item

A drum kit is designed as a set of stands, and then reality happens: a splash needs to go
somewhere, a cowbell arrives, an electronic pad joins, a second snare appears on the left.

None of those came with a stand, and the floor has no more room for one. A multi clamp turns any
tube you already own into a mounting point, which is why a working drummer's hardware bag
accumulates them the way a toolbox accumulates adapters.

## FastClamp

Tama's name for the quick-setup mechanism on the MC62, fitted to both sides.

The tedium of a clamp is that fitting one means threading a screw down onto a tube, and removing
it means winding the screw all the way back out to clear the tube's diameter. Multiply by four
clamps, twice a day.

A quick-setup clamp opens far enough to drop onto a tube without unwinding, and closes onto it in
a fraction of the turns. On a part that goes on and off at every setup, that is the difference
between using clamps and avoiding them.

## What a clamp cannot fix

One caution worth stating: a clamp transfers its load into the tube it is gripping, and a stand
that was specified to hold one cymbal is now holding two.

That is not usually a strength problem — the tube will take it — but it is a stability one. Two
cymbals on one tripod is a taller, heavier, more off-centre load than the base was designed
around. Spread the additions across stands rather than building a tree on one of them.

## Sources

1. Multi Clamp — MC61 / MC62 — Tama (tier 1) https://www.tama.com/usa/products/detail/multi_clamp.html

---
Source: https://thedrumatlas.com/hardware/tama-multi-clamp · Values marked "unverified" are editorial knowledge awaiting a source.
