---
title: "Tama Iron Cobra Lever Glide Hi-Hat Stand"
brand: "Tama"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/tama-iron-cobra-lever-glide-hi-hat-stand"
updated: "2026-09-11"
reviewed: "yes"
---

# Tama Iron Cobra Lever Glide Hi-Hat Stand

The Tama HH905 is a double-braced hi-hat stand using a lever-glide mechanism rather than a direct pull rod, giving a light, quiet action. It carries a six-way tension adjustment, a tilting base for expressive work and a Quick-Set clutch. Available two-leg (HH905N) and dual-leg (HH905D).


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Hi-hat stand | verified | Tama |
| Action | Lever Glide | verified | Tama |
| Legs | Double-braced; two-leg (HH905N) or dual-leg (HH905D) | verified | Tama |
| Tension adjustment | Six-way | verified | Sweetwater |
| Base | Tilting, for expressive hi-hat work | verified | Sweetwater |
| Clutch | Quick-Set | verified | Sweetwater |

## Two legs or three

This is the decision that matters and it is not about stability.

A **three-leg** stand is the default and it is fine until you play double bass, at which point one
of those legs is exactly where the left pedal wants to be. A **two-leg** stand moves the problem
out of the way. That is the entire reason the two-leg configuration exists.

If you play a single pedal, take the three-leg version — it is more stable and cheaper. If you
play doubles, or you set your hi-hat unusually close, the two-leg pays for itself immediately.

## What lever glide changes

Most hi-hat stands pull the rod directly: the footboard is connected to the pull rod through a
simple linkage, so the whole weight of the top cymbal is on your foot the entire time. Tama's
lever mechanism changes the leverage through the stroke, which makes the action lighter at the
top and quieter throughout.

Quiet matters more than it sounds. A hi-hat stand that clanks is audible on close mics and there
is nothing to be done about it after the fact.

## The bit people forget

**The six-way tension adjustment is the most useful feature on the stand and almost nobody
touches it.** It sets how hard the spring fights your foot. Set too tight, fast patterns become
exhausting; too loose and the chick loses definition.

Spend ten minutes with it once. It changes the feel more than a new pair of hi-hats would.

## Sources

1. Iron Cobra 900 Lever Glide Hi-Hat Stand — HH905D — Tama (tier 1) https://www.tama.com/usa/products/detail/hh905d.html
2. Tama HH905N Hi-hat Stand — Sweetwater (tier 2) https://www.sweetwater.com/store/detail/HH905N--tama-hh905n-hi-hat-stand

---
Source: https://thedrumatlas.com/hardware/tama-iron-cobra-lever-glide-hi-hat-stand · Values marked "unverified" are editorial knowledge awaiting a source.
