---
title: "Sonor 4000 Hardware Series"
brand: "Sonor"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/sonor-4000-hardware-series"
updated: "2026-09-24"
reviewed: "no"
---

# Sonor 4000 Hardware Series

The Sonor 4000 is the company's road-ready professional hardware line, assembled from a large range of individual components rather than sold only as packs. Its cymbal boom arm retracts completely into the stand, converting a mini boom into a straight cymbal stand without removing anything.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Hardware series — stands and holders | verified | Sonor |
| Boom arm | Fully retractable — converts the mini boom stand to a straight cymbal stand | verified | Sonor |
| Range | Sold as individual components | verified | Sonor |

## The retracting boom

A boom arm is a cantilever that puts a cymbal somewhere a straight stand cannot reach — over a
tom, in front of a hi-hat, angled down toward the player.

It is also the thing that will not fit on a small stage, and the thing your guitarist walks into.

A retractable boom slides fully back inside the upper tube, so the stand becomes a straight one in
a few seconds and becomes a boom again just as quickly. Nothing comes off, so nothing is left
behind — which is the failure mode of the detachable kind.

Tama does the same on the Roadpro and DW on the 9700. That three of the major makers arrived at
the same answer says something: a boom you have to remove is a boom you eventually lose.

## Components, not packs

Most hardware is sold as a pack: a snare stand, a hi-hat, two cymbal stands and a pedal, priced
together.

Packs are good value and they assume your kit is standard. Sonor's framing of the 4000 is that it
is "equipped with lots of individual components" — the range is deep enough to build an unusual
setup from parts rather than buy a pack and then buy the odd pieces separately.

For a player with three floor toms, or a left-side ride, or a percussion table, that distinction
is most of the decision.

## Road-ready, and what Sonor means by the tiers

The company's hardware ladder runs 1000, 2000, 4000, then 600 / 6000 at the top. The 4000 is the
first tier described as professional and road-ready, which places it where most working drummers
actually buy.

What separates it from the 600 above is the clamp engineering and the independently adjustable
legs; what separates it from the 2000 below is that the 2000 is a sturdier version of a basic
stand rather than a system with a component catalogue behind it.

## Ease of teardown

Sonor names setting up, adjusting and tearing down as the 4000's design brief, which is a
different emphasis from stiffness or mass.

It is the right one for a line at this level. A working drummer sets a kit up and takes it down
several hundred times a year and plays it a few hundred hours. Hardware that comes apart quickly
and goes back to the same place is worth more of those hours than hardware that is marginally more
rigid.

## Sources

1. Hardware Series — Sonor (tier 1) https://www.sonor.com/drums/instruments/hardware-series

---
Source: https://thedrumatlas.com/hardware/sonor-4000-hardware-series · Values marked "unverified" are editorial knowledge awaiting a source.
