---
title: "SKB 10 x 12 Tom Case (1SKB-D1012)"
brand: "SKB"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/skb-10x12-tom-case"
updated: "2026-09-24"
reviewed: "no"
---

# SKB 10 x 12 Tom Case (1SKB-D1012)

The 1SKB-D1012 is SKB's roto-moulded rack tom case, with a 14.5-inch interior diameter and 12 inches of interior depth — sized so a 10-inch drum up to 12 deep travels with its mounting hardware fitted. It carries the same Roto-X stacking pattern, pedestal feet, padded lining and lifetime warranty as the rest of the range.

**Sizes:** 10 × 12 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Model number | 1SKB-D1012 | verified | SKB Corporation |
| Type | Roto-moulded hard tom case | verified | SKB Corporation |
| Interior depth | 12 in | verified | SKB Corporation |
| Interior diameter | 14.5 in | verified | SKB Corporation |
| Exterior | 16 × 15.75 × 13.5 in | verified | SKB Corporation |
| Surface | Patented Roto-X pattern, for stacking | verified | SKB Corporation |
| Feet | Moulded pedestal feet, for upright storage | verified | SKB Corporation |
| Closure | Heavy-duty web strap with high-tension slide-release buckle | verified | SKB Corporation |
| Handles | Sure-grip, with a 90° stop | verified | SKB Corporation |
| Interior | Padded | verified | SKB Corporation |
| Weight | 6.54 lb | verified | SKB Corporation |
| Warranty | Life of the case, to the original owner | verified | SKB Corporation |

## The four and a half inches that matter

A 10-inch tom in a 14.5-inch interior has more than two inches of clearance all the way round.
That is not padding generosity — it is the room a **tom mount** needs.

Rack toms travel with an L-arm bracket or a suspension mount bolted to the shell, and a case cut
tight to the drum means taking the mount off at every load-out and putting it back on at every
load-in. Both operations are done in a hurry, both involve a hex key, and one of them ends with a
bracket left on a stage.

Twelve inches of interior depth does the same thing in the other axis: a 10 by 8 drum goes in with
the arm still attached and pointing up.

## Sizing by the case, not by the drum

SKB names the case by what it holds rather than by the drum it is for, which is why the model
number reads 1SKB-**D1012** — a depth-and-diameter pair, not a drum size.

Worth reading carefully when ordering. The relevant number is the largest drum you will ever put in
it, with its hardware on, and the range steps in the usual tom sizes above and below this one.

## Same shell, smaller

Everything structural is shared with the snare case: one seamless roto-moulded piece, the Roto-X
relief so a stack interlocks, moulded pedestal feet so it stands upright, and a web strap rather
than a latch carrying the closing load.

At 6.54 pounds it is the lighter end of the family, which matters more than it sounds. A four-piece
kit in hard cases is four of these decisions multiplied, and a pound each way is the difference
between one trip and two.

## Sources

1. 10 x 12 Tom Case — SKB Corporation (tier 1) https://www.skbcases.com/products/10-x-12-tom-case

---
Source: https://thedrumatlas.com/hardware/skb-10x12-tom-case · Values marked "unverified" are editorial knowledge awaiting a source.
