---
title: "Roc-N-Soc Tower"
brand: "Roc-N-Soc"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/roc-n-soc-tower"
updated: "2026-09-24"
reviewed: "no"
---

# Roc-N-Soc Tower

The Roc-N-Soc Tower is a tall fixed-height stool built for propping and leaning rather than full seating — 29, 26 or 20 inches depending on model. It uses two-ring construction for stability, the seat swivels, and it takes any of the company's four seat shapes.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Drum stool — tall, fixed height | verified | Roc-N-Soc |
| Heights | Tower 29 in, Tower Short 26 in, Tower Sub Short 20 in | verified | Roc-N-Soc |
| Construction | Two ring, for stability | verified | Roc-N-Soc |
| Seat | Swivelling | verified | Roc-N-Soc |
| Seat options | Original, Hugger, Square or Round | verified | Roc-N-Soc |
| Backrest | Not offered on Tower models | verified | Roc-N-Soc |

## Propping, leaning, demonstrating

Roc-N-Soc names three uses for this stool and none of them is sitting down to play a kit: propping,
leaning, and in-store demonstration.

That is the useful thing to know about it. At 29 inches the seat is higher than a drum throne needs
to be, and the position it produces is half-standing — weight partly on the seat, partly on the
legs, the player upright rather than seated.

Who needs that: a percussionist working standing instruments who wants somewhere to rest between
pieces; a singing drummer who needs a higher eye line; a player on a small stage working a cajon
or a cocktail kit; and, as the company says, anyone spending a day on a shop floor.

## Two-ring construction

A tall stool on a small base is a tipping problem, and the answer here is structural rather than
massive.

Two rings connect the legs at different heights instead of one. The lower ring is where the feet
go; the upper one triangulates the legs partway up their length, which stops them splaying under
a load applied high above the base.

It is the arrangement bar stools and workshop stools settled on for the same reason, and it is what
allows a 29-inch seat that does not need a heavy foot to stay put.

## Swivel as standard

Every Tower swivels, and on a tall stool that is less controversial than it is on a drum throne.

A leaning position is one you get in and out of frequently, and a seat that turns to meet you is
easier to mount than one that does not. There is also less of the twisting-under-load problem that
makes a free-spinning throne divisive, because a player at this height is not driving two pedals
from the seat.

## Three heights, no backrest

Tower at 29 inches, Tower Short at 26, Tower Sub Short at 20.

The 20-inch model overlaps with ordinary throne territory, and it is worth noting that it is still
a fixed-height stool with no adjustment — this is a family defined by not adjusting, where the rest
of the Roc-N-Soc catalogue is defined by how it adjusts.

Backrests are available across the Manual Spindle and Lunar ranges and are not offered here, which
follows from the intended use: you cannot lean back from a leaning position.

## The same seats

The Original saddle, the Hugger, the Round and the Square all fit, in the full colour range.

That is the through-line of the whole Roc-N-Soc catalogue: four seat shapes, and a choice of what
goes under them. The Tower is the option where what goes under them is height and nothing else.

## Sources

1. Tower Seats — Roc-N-Soc (tier 1) https://www.rocnsoc.com/products/tower-seats/

---
Source: https://thedrumatlas.com/hardware/roc-n-soc-tower · Values marked "unverified" are editorial knowledge awaiting a source.
