---
title: "Pearl Icon 3-Sided Drum Rack"
brand: "Pearl"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/pearl-icon-3-sided-rack"
updated: "2026-09-24"
reviewed: "no"
---

# Pearl Icon 3-Sided Drum Rack

The Pearl DR-503C is a three-sided drum rack on curved aluminium support rails that wrap the kit around the player. The rails adjust for bass drum clearance, and tom arms and cymbal booms adjust independently within each clamp. The system ships with four PCX-100 pipe clamps and two PCL-100 pivot mounts.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Drum rack — three sided | unverified | Sweetwater |
| Support rails | Curved aluminium, slip proof | unverified | Sweetwater |
| Legs and clamps | Steel | unverified | Sweetwater |
| Supplied clamps | Four PCX-100 pipe clamps and two PCL-100 pivot mounts | unverified | Sweetwater |
| Rail adjustment | Rails adjust for bass drum clearance; arms and booms adjust independently within each clamp | unverified | Sweetwater |
| Feet | Non-skid rubber | unverified | Sweetwater |

## Three sides

A single front bar carries the toms. A three-sided rack adds a wing on each side, and that changes
what a rack is for.

The front bar alone is a tom mount. Add the sides and the rack is carrying the cymbals too — which
means the tripods go away entirely and the only things standing on the floor are the rack's own
legs, the bass drum and the throne.

For a large kit that is the whole argument. Five cymbal stands interleaved with a snare stand and a
hi-hat is a thicket; six rack feet is not.

## Curved rails

The rails bend toward the player rather than running straight across.

Two things follow. A curve brings the mounting points closer without bringing the structure
closer — the rail arrives near your hands while its supports stay out at the edges of the kit. And
a curved rail puts drums and cymbals on an arc centred roughly on the player, which is the shape
a drummer's reach actually describes.

A straight bar puts everything on a line, and the ends of that line are further away than the
middle.

## Aluminium rails on steel legs

The materials are split by job, and it is a sensible split.

The rails are the long parts, so their weight dominates what the rack costs to carry, and they are
loaded mostly in bending along their length — a condition where a large-diameter aluminium tube
performs well for its mass.

The legs and clamps are steel. Legs take concentrated loads at their joints, and clamps need
threads that survive being done up hard several hundred times; both favour the stiffer, tougher
material even at the weight penalty.

## Adjustable clearance, and why it matters

A rack's front rail has to pass in front of the bass drum, and bass drums are not one size. A 26-inch
drum's hoop stands where a rail sized for a 20 would be.

Pearl's rails adjust for that, and tom arms and cymbal booms then adjust independently within their
clamps — so the rail can be moved to clear the drum without every mounting point having to be
re-found.

## The clamps in the box

Four PCX-100 pipe clamps and two PCL-100 pivot mounts.

That is the specification to check before pricing any rack, because a bare frame with nothing to
hang on it is a substantial second purchase. Six mounting points is a four-piece kit with a couple
of cymbals; a larger setup adds clamps from the same range.

## Sources

1. Pearl DR-503C Icon 3-sided Drum Rack, Chrome — Sweetwater (tier 2) https://www.sweetwater.com/store/detail/DR503C--pearl-dr-503c-icon-3-sided-drum-rack-chrome

---
Source: https://thedrumatlas.com/hardware/pearl-icon-3-sided-rack · Values marked "unverified" are editorial knowledge awaiting a source.
