---
title: "Kelly SHU FLATZ"
brand: "Kelly SHU"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/kelly-shu-flatz"
updated: "2026-09-24"
reviewed: "no"
---

# Kelly SHU FLATZ

FLATZ is Kelly SHU's isolation platform for boundary microphones that lie flat inside a kick drum — a patented moulded tray in 30% fibreglass and high-density polymer resin, 9 by 7 by 1 inch and 7 ounces, floating on four rubber isolation rings that hook to the drum's existing tuning hardware. No drilling.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Internal shock-mount platform for boundary microphones | verified | Kelly SHU |
| Material | 30% fibreglass with high-density polymer resins | verified | Kelly SHU |
| Weight | 7 oz | verified | Kelly SHU |
| Dimensions | 9 × 7 × 1 in | verified | Kelly SHU |
| Microphone compatibility | sE Electronics BL8, Shure Beta 91 and 91A, Sennheiser e901, Behringer BA 19A, and the discontinued Shure SM91 | verified | Kelly SHU |
| Mounting | Four solid rubber isolation rings and four leather loops to the drum's existing tuning hardware; no drilling | verified | Kelly SHU |
| Included | Platform, 4 rubber isolation rings, 4 leather installation loops, pictorial instructions | verified | Kelly SHU |
| Warranty | One year, limited | verified | Kelly SHU |

## A different kind of microphone

The Pro holds a microphone on a post. FLATZ does not, because the mics it is built for have no clip and
are not meant to be on a post.

A **boundary microphone** — the Shure Beta 91A, the Sennheiser e901, the sE BL8 — is a flat plate that
lies on a surface. Its capsule sits a fraction of a millimetre above that surface, which means the
direct sound and the reflection off the surface arrive in phase rather than fighting each other.

Inside a kick drum, the surface is usually the pillow or the floor of the shell, and the result is the
sound a lot of modern kick tracks are built on: fast, present, and with the low end the drum's interior
actually produces.

## The problem FLATZ solves

Lay a boundary mic on a blanket inside a bass drum and two things happen.

It **moves**, because a bass drum is a thing being kicked, and the position of a boundary mic relative
to the batter head changes the sound noticeably. And it hears the shell, because it is resting on a part
of the drum.

FLATZ is a moulded tray that holds the mic in a known position and floats that tray on **four rubber
rings** hooked to the tension rods. The mic stops migrating during the set and stops picking up the
shell's own vibration through the floor it is lying on.

Kelly SHU's stated case is transport: the mic stays inside the drum between gigs, and nothing shifts or
gets damaged on the way.

## Composite, not aluminium

Where the Pro is machined 303 aluminium at 19 ounces, FLATZ is moulded from **30% fibreglass in
high-density polymer resin** at 7 ounces.

That is a different engineering answer to a different shape. The Pro needs stiffness in a complex
three-dimensional part with threads in it; FLATZ needs a flat, rigid tray that will not flex under a
mic and will not ring. Glass-filled resin is stiff, dead and light, and it moulds in one piece.

Seven ounces inside a bass drum is close to irrelevant, which matters more than it sounds on an
instrument whose front head is already carrying a port, a pillow and sometimes a second mic.

## Installation

Four rubber rings, four leather loops, a pictorial sheet, and the drum's own tuning hardware. Nothing is
drilled, nothing is glued, and the whole thing comes off in a couple of minutes leaving no trace.

Leather loops rather than plastic is a small detail with a reason behind it: leather will not squeak or
buzz against a lug casing, and it stays flexible in cold weather in a way a moulded plastic hook does
not.

## Sources

1. The Kelly SHU FLATZ — Kelly SHU (tier 1) https://www.kellyshu.com/products/the-kelly-shu-flatz

---
Source: https://thedrumatlas.com/hardware/kelly-shu-flatz · Values marked "unverified" are editorial knowledge awaiting a source.
