---
title: "Gibraltar Chrome Series II Drum Rack"
brand: "Gibraltar"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/gibraltar-chrome-series-ii-drum-rack"
updated: "2026-09-24"
reviewed: "no"
---

# Gibraltar Chrome Series II Drum Rack

The Gibraltar Chrome Series II curved drum rack is a front-bar rack sized for four- and five-piece kits, with four mounting points built in — two on the main bar and one inside each leg — so it works out of the box without extra clamps. It breaks down into three to five pieces for a hardware bag.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Drum rack — curved front bar | verified | Gibraltar Hardware |
| Capacity | Four- and five-piece kits; 2–3 toms on the crossbar | verified | Gibraltar Hardware |
| Built-in mounting points | Two on the main bar, one inside each leg | verified | Gibraltar Hardware |
| Fasteners | Quick-release wing nuts, fixed leg angles | verified | Gibraltar Hardware |
| Memory locks | Fitted | verified | Gibraltar Hardware |
| Breakdown | Three to five pieces | verified | Gibraltar Hardware |

## Mounting points that are already there

The hidden cost of a drum rack is clamps. The bare frame arrives, and every tom arm, cymbal arm
and accessory needs a clamp of its own before anything can hang on it — which is a second purchase
roughly the size of the first.

This rack builds four receivers into the frame: two on the main crossbar for toms, and one inside
each leg for a cymbal arm. A four-piece kit with two crash cymbals is therefore complete out of
the box.

That is a real difference in what the thing costs to own, and it is also a difference in how it
packs: an integrated receiver cannot be left behind on a stage, which loose clamps reliably are.

## Fixed leg angles

Most racks let the legs swing to any angle, which sounds like flexibility and behaves like a
setup step.

Fixing the angle removes the decision. The legs go to one place, the frame lands in the same
geometry every time, and the memory locks then hold the heights. Between them, the rack rebuilds
itself — which is the whole reason a player chooses a rack over stands in the first place.

The trade is the ability to squeeze the frame into an odd corner. For a four-piece kit in a normal
space, that is a freedom you were not using.

## Curved, and what the shape does for a sight line

A straight front bar sits across the kit at one height. A curve drops at the ends and rises in the
middle — or the reverse, depending on the design — which gets the bar away from the level your
snare hand works at while still putting mounting points where the toms need them.

It also lowers the visual mass of the thing. A rack in front of a drummer is a horizon; a curved
one reads as part of the kit rather than as scaffolding in front of it.

## Three to five pieces

The number matters because a rack's reputation for being a nuisance to transport comes from racks
that break down into a dozen tubes and a bag of clamps.

Three to five components go into a standard hardware bag alongside the stands. That puts a rack
within reach of a player who loads their own car — which is not who racks have historically been
for.

## Sources

1. Gibraltar Chrome Series II Drum Rack — Gibraltar Hardware (tier 1) https://gibraltarhardware.com/products/chrome-series-ii-drum-rack

---
Source: https://thedrumatlas.com/hardware/gibraltar-chrome-series-ii-drum-rack · Values marked "unverified" are editorial knowledge awaiting a source.
