---
title: "Gibraltar 6707NL No Leg Hi-Hat Stand"
brand: "Gibraltar"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/gibraltar-6707nl-no-leg-hi-hat-stand"
updated: "2026-09-24"
reviewed: "no"
---

# Gibraltar 6707NL No Leg Hi-Hat Stand

The Gibraltar 6707NL is a hi-hat stand with no legs at all: it clamps to a rack rather than standing on the floor. It uses a radius rod between footboard and pull rod, a step-adjust tension lock and all-cast metal parts, ships with a Super Hi-Hat clutch and extends from 29 to 37 inches.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Hi-hat stand — legless, rack mounted | verified | Gibraltar Hardware |
| Height range | 29–37 in | verified | Gibraltar Hardware |
| Linkage | Radius rod footboard connection | verified | Gibraltar Hardware |
| Tension | Step-adjust lock | verified | Gibraltar Hardware |
| Clutch | Super Hi-Hat clutch, supplied | verified | Gibraltar Hardware |
| Parts | All cast metal | verified | Gibraltar Hardware |
| Memory lock | Height memory lock | verified | Gibraltar Hardware |

## Take the legs off and see what is left

A hi-hat stand does three jobs. It holds the cymbals at a height, it converts a footboard movement
into vertical motion of the top cymbal, and it stands up.

The third job is the one that costs floor space, and on a kit built around a rack there is already
a structure doing it. A legless hi-hat clamps to the rack tube and keeps the first two jobs.

What follows is the entire argument for the format. The square foot of floor a hi-hat tripod
occupies is the same square foot the snare stand's legs, the double pedal's slave and the
drummer's left foot all want. Remove three legs from that contest and the kit gets tighter.

## Radius rod instead of a chain

Between the footboard and the pull rod there has to be a linkage, and a legless stand has an
unusual constraint: the footboard sits on the floor and the stand does not, so the connection
spans a gap that varies with how the stand is clamped.

A radius rod — a curved solid rod, the same idea DW uses on its 6000 pedals — handles that
directly. It is rigid, it has no slack to develop, and it is the lightest of the options, with
nothing in it to wear out.

The feel it gives is immediate rather than cushioned, which is the same property direct drive has
on a bass pedal.

## Step-adjust tension

Spring tension on a hi-hat is usually a continuous screw, which means it can be set anywhere and
also that you cannot find your way back to where it was.

A step adjustment moves between defined positions. You lose the ability to land exactly between
two of them; you gain a setting you can restore from memory, and one that does not drift a
quarter-turn over an evening of vibration.

## The clutch, and cast parts

The Super Hi-Hat clutch is supplied, which is not universal — clutches are a common separate
purchase and a common thing to leave on a borrowed stand.

All cast metal parts is the other spec worth reading. On a stand that lives clamped to a rack and
gets a boot every time someone walks past the kit, the failure points are the small brackets and
collars. Cast metal ones bend before they break, and they do not crack the way filled plastic
does when it is cold.

## Sources

1. Gibraltar 6707NL No Leg Hi-Hat Stand — Gibraltar Hardware (tier 1) https://gibraltarhardware.com/products/gibraltar-6707nl-no-leg-hi-hat-stand

---
Source: https://thedrumatlas.com/hardware/gibraltar-6707nl-no-leg-hi-hat-stand · Values marked "unverified" are editorial knowledge awaiting a source.
