---
title: "DW 9900 Double Tom Stand"
brand: "DW"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/dw-9900-double-tom-stand"
updated: "2026-09-24"
reviewed: "no"
---

# DW 9900 Double Tom Stand

The DW 9900 is a heavy-gauge double tom stand with oversized tube joints to limit wobble and ball-and-socket adjustment at the arms. It carries half-inch tom arms sized for DW's TB12 brackets, an auxiliary clamp for a cymbal or percussion, hinged memory locks and plastic tube insulators.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Double tom stand | verified | Drum Workshop |
| Tubing | Heavy gauge, with oversized tube joints to minimise wobble | verified | Drum Workshop |
| Arm adjustment | Ball and socket | verified | Drum Workshop |
| Tom arms | ½ in diameter, for DW TB12 brackets | verified | Drum Workshop |
| Auxiliary clamp | Included, for cymbals or percussion | verified | Drum Workshop |
| Memory locks | Hinged | verified | Drum Workshop |
| Tube insulation | Plastic insulators against rattle | verified | Drum Workshop |
| Related models | 9991 single tom, 9934 double with boom arm, 9999 tom and cymbal | verified | Drum Workshop |

## Toms off a stand rather than off the drum

There are two places a rack tom can hang: from a bracket on the bass drum, or from a stand on the
floor.

Mounting on the bass drum means drilling it, and a hole in a bass drum shell is permanent. It also
couples the toms to the drum — everything the bass drum does mechanically arrives at the tom
mounts, and vice versa.

A tom stand leaves the bass drum whole. That matters for a vintage drum, for a shell you do not
own, and for anyone who believes an undrilled bass drum sounds better. It also means the toms stay
where they are when the bass drum is nudged, which over a loud set is not nothing.

## Ball and socket

The joint at the top of each arm is a ball in a clamped socket rather than a ratchet or a pair of
toothed plates.

A ratchet moves in one plane and stops at fixed increments. A ball and socket moves in every plane
at once and stops anywhere — which is what a tom actually needs, because getting a drum's angle
right is simultaneously a question of tilt toward the player and rotation around its own axis.

DW's own claim is virtually limitless options, and for once that is a description of the geometry
rather than a superlative.

## Oversized tube joints

A tom stand carries a mass out on an arm, and every stroke that lands on the drum tries to rotate
it about the stand's joints.

Making the joints oversized — a larger diameter overlap between the sections — increases the
leverage the clamp has for a given tightening force, so the same wing nut holds more. The
practical result is a stand that does not develop the slow droop that a loaded tom arm produces
over an evening.

That does cost weight, and it is part of why the 9000 Series is the heavy end of DW's range.

## Plastic tube insulators

The same detail as on the 9700 cymbal stand, and the same reason.

Metal tubes ring. A stand holding two toms, in a room with microphones on those toms, will pick up
and re-radiate low-frequency energy from the kit, and it arrives on the recording as a faint
metallic buzz that is very difficult to identify after the session.

A sleeve inside each tube damps it. It costs nothing on stage and it is the sort of thing that
matters a great deal in a control room.

## Which one in the family

DW builds this geometry four ways: the 9991 single, the 9900 double, the 9934 double with a boom
arm added, and the 9999 tom-and-cymbal combination.

Choosing between them is mostly about how many stands you want on the floor. Every combination
model is one fewer tripod, and one more thing that has to come down when you want to move
something.

## Sources

1. DW 9000 Series Double Tom Stand — DWCP9900 — Drum Workshop (tier 1) https://www.dwdrums.com/products/dwcp9900-9000-series-double-tom-stand/

---
Source: https://thedrumatlas.com/hardware/dw-9900-double-tom-stand · Values marked "unverified" are editorial knowledge awaiting a source.
