---
title: "DW 9700 Boom Cymbal Stand"
brand: "DW"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/dw-9700-boom-cymbal-stand"
updated: "2026-09-11"
reviewed: "yes"
---

# DW 9700 Boom Cymbal Stand

The DW DWCP9700 is a heavy-duty convertible straight/boom cymbal stand with three telescoping sections — ¾-inch upper, 1-inch middle and 1¼-inch base — and an 18-inch boom arm. It reaches 88 inches at the cymbal seat and weighs 12.3 pounds.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Cymbal stand — straight/boom convertible | verified | Sweetwater |
| Upper tube | 0.75 in | verified | Sweetwater |
| Middle tube | 1 in | verified | Sweetwater |
| Base tube | 1.25 in | verified | Sweetwater |
| Boom arm | ½ in diameter, 18 in long | verified | Sweetwater |
| Legs | Double braced, with memory locks | verified | Sweetwater |
| Tilter | Toothless, with Techlock secondary drum-key lock | verified | Sweetwater |
| Tube insulation | Built-in plastic insulators to prevent rattle | verified | Sweetwater |
| Maximum cymbal seat height | 88 in | verified | Sweetwater |
| Weight | 12.3 lb | verified | Sweetwater |

## Toothless tilters, and why they matter

The tilter is the joint that sets the cymbal's angle, and it is the part of a cymbal stand most
likely to annoy you.

A **toothed** tilter has interlocking gear teeth. It holds firmly and it never slips, but it can
only stop at the angles the teeth allow — and the angle you want is frequently between two of them.
Every drummer has spent time choosing between slightly too flat and slightly too steep.

A **toothless** tilter uses friction instead, so it stops anywhere. The historic objection is that
friction joints creep under playing, which is why DW adds **Techlock**: a secondary lock tightened
with a drum key that clamps the joint once you have found the angle.

Infinite adjustment plus a positive lock. It is the right answer and it costs more, which is why
you find it on flagship hardware and not on entry stands.

Compare Tama's **Quick-Set** tilter on the Roadpro, which achieves the same thing with six
friction discs, and Pearl's **Uni-Lock** on the S-930. Three companies, three routes to the same
conclusion: gear teeth were always a compromise.

## Three sections, and what that buys

Most cymbal stands telescope twice. This one telescopes three times — ¾ inch inside 1 inch inside
1¼ inch.

The gain is range. Eighty-eight inches at the cymbal seat is very tall, and the stand still packs
down small enough to case. For a drummer with a high ride or a cymbal reaching over a large kit,
the third section is the difference between possible and not.

The cost is one more joint, and every joint is a potential wobble. DW's answer is oversized tube
joints and hinged memory locks at each one — which is also why the stand weighs 12.3 pounds.

## Plastic tube insulators

A sleeve inside each tube, and the least glamorous feature here.

Metal tubes ring. A stand with a cymbal on it, close to a drum microphone, will pick up and
re-radiate low-frequency energy from the kit — and it arrives on the recording as a faint metallic
buzz that is very hard to identify after the fact.

Insulators damp the tube so it does not ring. It is a studio feature that costs nothing on stage
and matters a great deal in a room with microphones near the hardware.

## The weight question

Twelve pounds is a lot for one cymbal stand. A five-cymbal kit built on these is over sixty pounds
of stands alone, before any drums.

That is the genuine trade, and it is the same one the DW 9300 snare stand makes. Heavy hardware
stays where you put it, survives being knocked, and holds a large cymbal on a long boom without
creeping. It also has to be carried.

For a touring player with a tech, it is straightforward. For a drummer loading their own car, the
Tama Roadpro at 11 pounds or the single-braced Stage Master at 6.6 are worth considering — and the
cymbal sounds the same on all three.

## Sources

1. 9000 Series hardware — Drum Workshop (tier 1) https://www.dwdrums.com/
2. DW DWCP9700 9000 Series Straight / Boom Cymbal Stand — Sweetwater (tier 2) https://www.sweetwater.com/store/detail/DWCP9700--dw-9700-heavy-duty-double-braced-straight-boom-cymbal-stand

---
Source: https://thedrumatlas.com/hardware/dw-9700-boom-cymbal-stand · Values marked "unverified" are editorial knowledge awaiting a source.
