---
title: "DW 6500 Flush Base Hi-Hat Stand"
brand: "DW"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/dw-6500-flush-base-hi-hat-stand"
updated: "2026-09-24"
reviewed: "no"
---

# DW 6500 Flush Base Hi-Hat Stand

The DW 6500 is a flush-base hi-hat stand weighing 6.7 pounds, using an offset direct-pull linkage with a spring tension adjuster and DW's Delta ball-bearing hinge. It ships with 21-inch and 15-inch pull rods, hinged memory locks and a locking clutch.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Hi-hat stand | verified | Drum Workshop |
| Base | Flush base | verified | Drum Workshop |
| Weight | 6.7 lb | verified | Drum Workshop |
| Linkage | Offset direct pull with spring tension adjuster | verified | Drum Workshop |
| Hinge | Delta ball-bearing, US Patent 5431081 | verified | Drum Workshop |
| Pull rods | 21 in and 15 in, both supplied | verified | Drum Workshop |
| Clutch | Locking | verified | Drum Workshop |
| Memory locks | Hinged | verified | Drum Workshop |

## Flush base versus tripod

A tripod hi-hat stand has three legs that splay out and sit under the cymbals. A flush base has
three flat legs that lie along the floor, close to it, in the same plane as the stand's foot.

What that buys is room. The legs of a tripod hat are exactly where a double pedal's slave wants to
be, and exactly where the snare stand's front leg wants to be. A flush base lets all three
occupy the same square foot of stage, which is why the design has followed bop kits and tight
setups since the 1930s and keeps coming back.

What it gives up is the vertical stiffness of a splayed tripod. A flush base resists being pushed
over less well, and it is the reason this style tends to be paired with lighter cymbals and a
seated player who is not stamping.

## Offset direct pull

Three ways to connect a footboard to a pull rod: a chain, a strap, or a solid link.

Direct pull is the solid link — no chain to stretch, no strap to age, no slack anywhere in the
system. The pedal moves the rod instantly, which is what makes the action feel immediate under the
foot rather than slightly cushioned.

Offsetting it moves the linkage out of the centre line. The practical result is that the pull rod
runs clear of the footboard's travel, which is what allows the legs to lie flat and still leave
the mechanism room to work.

## Six and a bit pounds

The weight is the headline, and it is unusually low for a hi-hat stand with a bearing hinge and a
tension adjuster in it.

A lightweight stand trades some of its resistance to being shoved. What it gains is a hardware bag
you can carry in one trip — a five-piece kit's hardware assembled from the 6000 Series is a
different object to lift than the same kit on 9000, and for a drummer who loads their own car
that is a real part of the instrument.

## Sources

1. DW 6000 Series Flush Base Hi-Hat Stand — DWCP6500 — Drum Workshop (tier 1) https://www.dwdrums.com/products/dwcp6500-6000-series-flush-base-hi-hat-stand/

---
Source: https://thedrumatlas.com/hardware/dw-6500-flush-base-hi-hat-stand · Values marked "unverified" are editorial knowledge awaiting a source.
