---
title: "Canopus CHS-1 Light Weight Hi-Hat Stand"
brand: "Canopus"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/canopus-light-weight-hi-hat-stand"
updated: "2026-09-24"
reviewed: "no"
---

# Canopus CHS-1 Light Weight Hi-Hat Stand

The Canopus CHS-1 is a hi-hat stand weighing 2.8 kg, built on 19 mm and 16 mm tube. Its legs rotate to clear a double pedal, the spring tension adjusts, and a bearing is used in the action. Height runs from about 740 to 870 mm.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Hi-hat stand | verified | Canopus |
| Weight | 2.8 kg | verified | Canopus |
| Height range | 740–870 mm | verified | Canopus |
| Tube diameters | 19 mm and 16 mm | verified | Canopus |
| Legs | Rotating, to leave room for a double pedal | verified | Canopus |
| Tension | Spring adjustment fitted | verified | Canopus |
| Bearings | Fitted | verified | Canopus |

## Six pounds

A hi-hat stand is normally the second-heaviest thing in a hardware bag after the throne, and 2.8 kg
is roughly half what a heavy-duty one weighs — DW's flush-base 6500, itself the light option in
that range, is 6.7 lb where this is 6.17.

Canopus is direct about the prejudice it is working against: lightweight hardware reads as cheap,
flimsy or fragile, and the company's stated aim was function and durability for professional use at
minimal weight.

The route there is tube diameter and leg width, both kept to the minimum the loads allow. Nothing
exotic — just a refusal to add metal that is not doing anything.

## The rotating legs

The most specific feature here, and it addresses the single most common setup conflict on a drum
kit.

A hi-hat stand's three legs occupy the same floor as the double pedal's slave, the snare stand's
front leg and the player's own left foot. On most stands the legs are fixed in their splay, so
solving that conflict means moving the whole stand — which moves the cymbals.

Legs that rotate around the column let you turn the obstruction out of the way while the stand
stays where the hi-hat needs to be. It is the same problem Sonor answers with independently
adjustable base legs and DW with a two-leg hi-hat, solved a third way.

## A bearing, in a light stand

Bearings add cost and a little weight, and they are the first thing omitted from a stand built
down to a price.

Their presence here is the evidence for Canopus's claim that this is a light stand rather than a
cheap one. The hi-hat's action is the part a drummer feels most directly — a rod running in a plain
bush is stiff, then loose, then notchy — and a bearing is what keeps a light stand from feeling
like a compromise.

## Where 740 mm puts the cymbals

About 29 inches at the bottom and 34 at the top. That is a normal working range rather than a wide
one, and it reflects the design: a stand that does not extend to towering heights does not need
the tube diameter that would support them.

For a player sitting at a conventional height with the hats in a conventional place, it is the
range that gets used. For a very tall player or someone who plays the hats high and open, the
heavier stands have the reach.

## Sources

1. Light Weight Hi-Hat Stand CHS-1 — Canopus (tier 1) https://canopusdrums.com/en/product/lightweight-hihatstand/

---
Source: https://thedrumatlas.com/hardware/canopus-light-weight-hi-hat-stand · Values marked "unverified" are editorial knowledge awaiting a source.
