---
title: "Canopus CDT2-1HY Hybrid Drum Throne II"
brand: "Canopus"
category: "Hardware"
url: "https://thedrumatlas.com/hardware/canopus-hybrid-drum-throne-ii"
updated: "2026-09-24"
reviewed: "no"
---

# Canopus CDT2-1HY Hybrid Drum Throne II

The Canopus Hybrid Drum Throne II has a seat top woven from sisal hemp and rayon over firm urethane, on an iron-plate joint and a base of aluminium legs with steel rods. It weighs 6.1 kg in total — 2.8 for the seat, 3.3 for the legs — and adjusts between 520 and 720 mm.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Type | Drum throne | verified | Canopus |
| Seat top | Sisal hemp and rayon over firm urethane | verified | Canopus |
| Height range | 520–720 mm | verified | Canopus |
| Weight | 6.1 kg | verified | Canopus |
| Weight, seat | 2.8 kg | verified | Canopus |
| Weight, leg part | 3.3 kg | verified | Canopus |
| Joint | Iron plate | verified | Canopus |
| Legs | Aluminium long legs with steel rods | verified | Canopus |

## Sisal hemp on a drum throne

An unusual material choice, and it is doing one job: airflow.

Sisal is a coarse plant fibre with a loose, open weave — the material of rope and of natural-fibre
matting. Woven into a seat top it leaves large gaps between fibres, so air moves through the
surface rather than being trapped against it.

Vinyl does the opposite: it is a sealed membrane, and everything the player produces over three
hours stays between them and the seat.

The trade-off with a coarse fibre is comfort against bare skin, which is why Canopus blends it with
rayon. Rayon is smooth and soft where sisal is not, so the surface you sit on has the hemp's
structure and the rayon's feel.

## Firm urethane, deliberately

Underneath is urethane foam, and Canopus specifies it as reasonably firm rather than soft.

That reflects the same finding Tama reached with the Glide Rider: the seat that feels best for five
seconds in a shop is too soft to play on. A soft cushion lets the pelvis sink and roll backward,
which rounds the spine and takes away the stable platform the legs need to work two pedals from.

Firm foam keeps the sit bones supported and the pelvis upright. It feels less generous and it plays
better.

## Where the metals go

The throne's construction is a study in putting each material where it earns its keep.

**Iron plate** at the joint between seat and post — the part carrying a cantilevered load and the
part most likely to loosen. Steel is stiff and cheap to make stiff, and the weight is at the
centre where it does not have to be carried far.

**Aluminium** in the long legs, where length multiplies any weight saved and where a large tube
section regains the stiffness the material gives up.

**Steel rods** in the bracing, where the load is tension and compression along a line rather than
bending, and steel's stiffness per unit cost is at its best.

That is what "hybrid" refers to here — not a hybrid of styles, but of materials chosen part by
part.

## Six kilos, in two pieces

The total is 6.1 kg, and Canopus lists the seat and the leg part separately because they come
apart: 2.8 and 3.3.

A throne that separates is a throne that packs. Assembled it is the worst shape in a hardware load;
split into a disc and a folded tripod it is two flat objects, and each half is light enough to
carry alongside something else.

## Sources

1. Hybrid Drum Throne II CDT2-1HY — Canopus (tier 1) https://canopusdrums.com/en/product/hybrid-drumthrone-2/

---
Source: https://thedrumatlas.com/hardware/canopus-hybrid-drum-throne-ii · Values marked "unverified" are editorial knowledge awaiting a source.
