---
title: "Roland VAD507"
brand: "Roland"
category: "Electronic kit"
url: "https://thedrumatlas.com/electronic-drums/roland-vad507"
updated: "2026-09-24"
reviewed: "no"
---

# Roland VAD507

A five-piece acoustic-shell kit on the TD-27 module: a 14-inch stainless-steel PD-140DS digital snare, 10 and 12 inch rack toms and a 14-inch floor tom in full-depth wood shells, a 20-inch kick, and digital hi-hat and ride. It adds the VH-14D digital hi-hat to what the VAD506 had.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Module | TD-27 | verified | Roland |
| Pad surface | Multi-ply, tension-adjustable mesh heads on the drum pads | verified | Roland |
| Kit configuration | TD-27 module, PD-140DS snare, PDA100-MS and PDA120-MS rack toms, PDA140F-MS floor tom, VH-14D hi-hat, CY-14C-T and CY-16R-T crashes, CY-18DR ride, KD-200-MS kick, two DCS-30 combination stands and a DBS-30 boom stand | verified | Roland |
| Shells | Full-depth, full-diameter wood shells in wraps — 10 in and 12 in rack toms, 14 in floor tom, 20 in kick; the 14 in snare has a stainless steel shell | verified | Roland |
| Hi-hat | VH-14D, 14 in digital — the addition over the VAD506 | verified | Roland |
| Cymbals | 14 in and 16 in thin-profile crashes with textured finishes, 18 in CY-18DR digital ride | verified | Roland |
| Trigger inputs | Four spare trigger jacks on this configuration — AUX 1 to AUX 3 and CRASH 2 | verified | Roland |
| Outputs | Stereo main outputs plus two direct outputs on the TD-27 | verified | Roland |
| Footprint | 1,850 mm wide by 1,400 mm deep by 1,200 mm high; 54 kg assembled | verified | Roland |

## A stainless steel snare

The 14-inch PD-140DS at the front of this kit has a **stainless steel shell**, which is an unusual
thing to find on an electronic snare and a deliberate one. Metal shells are stiff and light; the pad
mounts on a conventional snare stand, sits at acoustic rim height, and carries Roland's digital
multi-element sensing under a tensioned mesh head.

The result is a snare that takes cross-sticks, rimshots and ghost notes as separate events, reported
by position across the head rather than by loudness alone. On a kit meant for a stage, that is the
drum the audience hears most and the one a drummer will notice first.

## Full shells on acoustic hardware

Ten and twelve inch rack toms, a fourteen-inch floor tom, and a twenty-inch kick — all in full-depth,
full-diameter wood shells with wraps, on double-braced chrome stands carried down from the flagship
VAD706. The toms mount the way acoustic toms mount.

That is the whole argument of the Acoustic Design line. Electronics decide what the kit sounds like;
hardware and shell dimensions decide what it is like to sit behind. A twenty-inch kick takes a normal
pedal at a normal height and sits on spurs. The spread between the floor tom and the hi-hat is the
spread a drummer's arms already know.

## Digital hi-hat, digital ride

The VAD507's addition over the VAD506 it replaced is the **VH-14D** digital hi-hat, joining the
CY-18DR digital ride and the PD-140DS snare on the TD-27's three digital ports.

A digital hi-hat reports pedal position continuously, so the ground between fully open and fully
closed exists. Half-open sixteenths, a foot splash, tightening through a phrase — those all come from
the pedal's travel, and a switch cannot supply them.

## Room to grow

Three auxiliary trigger inputs and the second crash jack stay spare, which is enough for an extra
tom, a splash and a percussion pad without going near the module's limit. Stereo main outputs plus
two direct outs cover a small desk; for a bigger one, the VAD706 and its TD-50X have more.

## Sources

1. Roland VAD507 — Roland (tier 1) https://www.roland.com/global/products/vad507/

---
Source: https://thedrumatlas.com/electronic-drums/roland-vad507 · Values marked "unverified" are editorial knowledge awaiting a source.
