---
title: "Roland TD-27KV2"
brand: "Roland"
category: "Electronic kit"
url: "https://thedrumatlas.com/electronic-drums/roland-td-27kv2"
updated: "2026-09-24"
reviewed: "no"
---

# Roland TD-27KV2

The TD-27KV2 is the fuller of the two kits built on Roland's TD-27 module: a 14-inch PD-140DS digital snare with a three-layer mesh head, three PDX-100 mesh toms, the VH-14D digital hi-hat and the CY-18DR digital ride. Three of its pads sense digitally; the rest run on analogue triggers.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Module | TD-27 | verified | Roland |
| Pad surface | Three-layer mesh snare and mesh-head toms | verified | Roland |
| Kit configuration | TD-27 module, PD-140DS snare, three PDX-100 toms, VH-14D hi-hat, CY-12C-T and CY-14C-T crashes, CY-18DR ride, KD-10 kick, MDS-STD2 stand | verified | Roland |
| Snare pad | PD-140DS, 14 in digital, three-layer mesh on a standard 14 in shell, with multi-element sensing for head, rimshot and cross-stick | verified | Roland |
| Hi-hat | VH-14D, 14 in digital | verified | Roland |
| Cymbals | 12 in and 14 in thin-profile crashes, 18 in CY-18DR digital ride | verified | Roland |
| Trigger inputs | Four spare trigger jacks on this configuration — AUX 1 to AUX 3 and CRASH 2 | verified | Roland |
| Footprint | 1,550 mm wide by 1,200 mm deep by 1,200 mm high; 33 kg assembled | verified | Roland |

## The kit where digital pads become standard

The TD-27 module has three digital trigger ports, and the KV2 is the configuration that uses all
three: the PD-140DS snare, the VH-14D hi-hat and the CY-18DR ride. Buying the module in this kit
means the sensing pads are already there rather than being a later purchase.

The difference those make is not louder or clearer — it is **positional**. The snare knows where
across the head the stick landed and separates head, rimshot and cross-stick from each other; the
hi-hat reports continuous pedal travel instead of a handful of steps; the ride distinguishes bow,
edge and bell. Those are the articulations that make a part sound played rather than programmed.

## A 14-inch snare on a 14-inch shell

The PD-140DS fits its three-layer mesh head to a standard 14-inch shell. That matters more than the
head count suggests: a full-size shell puts the hoop at the right diameter and the playing surface at
the right size, so a stroke landing an inch off centre still lands on the head.

Three layers of mesh is Roland's answer to the trade-off in a tensioned head. A single layer is
bouncy and noisy; stacking layers damps the rebound toward what a drumhead actually does and cuts the
acoustic noise the pad makes in the room.

## Three toms and thin cymbals

Three PDX-100 mesh-head pads cover the toms, and the crashes are 12 and 14 inch thin-profile
CY-T pads. The thin profile is a movement decision rather than a sound one: a thin cymbal pad swings
when struck and settles the way a cymbal does, so the stick meets something that gives.

Four trigger jacks are left spare — AUX 1 to AUX 3, plus the CRASH 2 input used here for the second
crash — which is room for an extra tom, a splash or a percussion pad.

## Against the rest of the range

At 33 kg and 1,550 mm wide it is a compact rack kit, not a shell kit; the VAD507 is the same module
in acoustic shells. Below it, the TD-17KVX2 uses the same idea with analogue pads throughout. The
TD-27KV2 is the point in the V-Drums range where digital sensing stops being an upgrade path and
becomes what you get.

## Sources

1. Roland TD-27KV2 — Roland (tier 1) https://www.roland.com/global/products/td-27kv2/

---
Source: https://thedrumatlas.com/electronic-drums/roland-td-27kv2 · Values marked "unverified" are editorial knowledge awaiting a source.
