---
title: "Roland TD-17KVX2"
brand: "Roland"
category: "Electronic kit"
url: "https://thedrumatlas.com/electronic-drums/roland-td-17kvx2"
updated: "2026-09-24"
reviewed: "no"
---

# Roland TD-17KVX2

The largest of the TD-17 kits: a 12-inch PDX-12 snare on a double-mesh head mounted to a conventional snare stand, three 10-inch PDX-8 mesh toms, a 12-inch VH-10 hi-hat on a real hi-hat stand, and thin-profile crash and ride pads, all on the TD-17 module.


## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Module | TD-17 | verified | Roland |
| Pad surface | Double-mesh snare and mesh-head toms | verified | Roland |
| Kit configuration | TD-17 module, PDX-12 snare, three PDX-8 toms, VH-10 hi-hat, two CY-12C-T crashes, CY-14R-T ride, KD-10 kick, MDS-Compact stand | verified | Roland |
| Snare pad | PDX-12, 12 in, double mesh, mounted on a conventional snare stand | verified | Roland |
| Hi-hat | VH-10, 12 in, with natural motion and open/closed detection | verified | Roland |
| Cymbals | Two 12 in thin-profile crashes and a 14 in thin-profile ride | verified | Roland |
| Trigger inputs | Two spare trigger jacks on this configuration — AUX and CRASH 2 | verified | Roland |
| Footprint | 1,315 mm wide by 1,100 mm deep by 1,200 mm high; 24.7 kg assembled | verified | Roland |

## The snare goes on a snare stand

The specification that changes the most about how this kit plays is also the least technical one: the
PDX-12 snare mounts on a conventional snare stand rather than on an arm bolted to the rack.

A stand puts the snare where the player wants it, at the angle they want, at the height their
technique was built around, and it lets them move it without rebuilding the kit. A rack arm puts it
where the arm reaches. Anyone who has tried to set a comfortable snare angle on a compact electronic
kit knows which of those is worth having.

Twelve inches of double mesh on that stand is also a serious playing surface — large enough that
ghost notes near the edge and accents in the centre land on different parts of the same drum, which
is what a snare is for.

## A hi-hat on a hi-hat stand

The VH-10 is a two-part hi-hat that mounts on a real hi-hat stand and moves through the same travel a
pair of cymbals would. Pedal position controls the sound continuously, so half-open work and foot
splashes behave, and the foot learns the motion it will need on an acoustic kit.

This is the single most common gap between a practice kit and a playable one. Compact kits often fix
the hi-hat pad to a post and read the pedal as a switch, and everything between open and closed
disappears.

## Three toms and thin cymbals

Three 10-inch PDX-8 mesh pads with head and rim triggering, two 12-inch thin-profile crashes and a
14-inch thin-profile ride. Thin cymbal pads swing and settle after a hit rather than staying rigid,
which is a feel decision rather than a sound one — the stick meets something that gives.

Two trigger jacks stay free, so an extra tom or a percussion pad can be added without a module
change.

## Where it fits

At 24.7 kg it is genuinely a bedroom-and-back-of-a-car kit; the MDS-Compact rack is 1,315 mm wide.
Above it, the TD-27KV2 puts digital sensing pads on the snare, hi-hat and ride. The TD-17KVX2 is what
the TD-17 module can do with analogue pads when none of them have been shrunk to save money.

## Sources

1. Roland TD-17KVX2 — Roland (tier 1) https://www.roland.com/global/products/td-17kvx2/

---
Source: https://thedrumatlas.com/electronic-drums/roland-td-17kvx2 · Values marked "unverified" are editorial knowledge awaiting a source.
