---
title: "Remo Powerstroke P4 Coated"
brand: "Remo"
category: "Drumhead"
url: "https://thedrumatlas.com/drumheads/remo-powerstroke-p4-coated"
updated: "2026-09-24"
reviewed: "no"
---

# Remo Powerstroke P4 Coated

The Remo Powerstroke P4 Coated is two plies of 7-mil coated film with a 3-mil inlay ring. Two plies self-damp and the ring takes the edge overtones off, so the head gives controlled sustain and focused low-end tones with increased durability. Remo calls it the warmest of its two-ply coated bass drum heads.

**Sizes:** 8 in, 10 in, 12 in, 13 in, 14 in, 15 in, 16 in, 18 in, 20 in, 22 in, 23 in, 24 in, 26 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Plies | 2 | verified | Remo |
| Film thickness | 7 + 7 mil | verified | Remo |
| Coating | Coated | verified | Remo |
| Position | Batter | verified | Remo |
| Dampening | 3-mil inlay ring at the perimeter | verified | Remo |
| Intended use | Toms and bass drum; hard rock and applications needing minimal sustain | verified | Remo |
| Character | Controlled sustain and focused low-end tones with increased durability | verified | Remo |

## Powerstroke, on two plies

The number in the name is the giveaway. **P3** is a single ply with a perimeter ring. **P4** is two
plies with a perimeter ring — here two of 7-mil coated film with a 3-mil ring.

So this head damps itself twice over, by two independent mechanisms.

The **two plies** are not bonded across their surface, so they move slightly against each other as the
head vibrates and turn that movement into heat. That is what makes any Emperor shorter and fatter than
an Ambassador.

The **inlay ring** damps the perimeter, where the head's high, tight overtones live, leaving the
fundamental at the centre intact.

Neither one is a blanket. Together they produce Remo's stated result: controlled sustain and focused
low-end tones.

## A light ring, on purpose

Three mil, where the single-ply P3 bass heads carry 10. That is not a downgrade — it is a consequence.

The two plies have already removed most of what a heavy ring would be removing. Bolting a 10-mil ring
onto an already self-damping head would push it past controlled and into dead, so Remo uses the lighter
ring to finish the job rather than to do all of it.

## Toms as well as bass

Remo lists this from 8 inch to 26 inch, and names toms and bass drum both. That is a wide span for one
construction and it is genuinely useful: a kit with P4 Coated on the toms and on the bass batter has
the same damping behaviour throughout, which makes the whole kit sound like one instrument.

On toms it gives a short, thick, punchy note with almost no ring — the sound of a great deal of hard
rock recording. On a bass drum it gives a controlled thud that needs little or no muffling inside.

## The warmest of the two-ply coated bass heads

Remo's claim, and the construction supports it. Two plies of 7 mil is the standard Emperor weight
rather than a heavy one, the ring is light, and the coating rounds the attack. Nothing in the head is
trying to be bright.

## Where it fits

Toms and bass drums for hard rock and anywhere minimal sustain is wanted. The clear P4 keeps more
attack; the plain coated Emperor is the same two plies without the ring.

## Sources

1. Powerstroke P4 Coated — Remo (tier 1) https://remo.com/product/powerstroke-p4-coated

---
Source: https://thedrumatlas.com/drumheads/remo-powerstroke-p4-coated · Values marked "unverified" are editorial knowledge awaiting a source.
