---
title: "Remo Powerstroke P3 White Suede"
brand: "Remo"
category: "Drumhead"
url: "https://thedrumatlas.com/drumheads/remo-powerstroke-p3-white-suede"
updated: "2026-09-24"
reviewed: "no"
---

# Remo Powerstroke P3 White Suede

The Remo Powerstroke P3 White Suede is one ply of 10-mil textured film with a 10-mil inlay ring, for either side of a bass drum. It gives focused, warm tones with overtone control and accentuated low end, on a matte white face that reads clean from the front without a smooth film's gloss.

**Sizes:** 18 in, 20 in, 22 in, 23 in, 24 in, 26 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Plies | 1 | verified | Remo |
| Film thickness | 10 mil | verified | Remo |
| Coating | Textured white | verified | Remo |
| Position | Batter or resonant | verified | Remo |
| Dampening | 10-mil inlay ring at the perimeter | verified | Remo |
| Intended use | Bass drum | verified | Remo |
| Surface | Suede — Remo's texturing process, producing a matte white non-reflective look | verified | Remo |
| Character | Overtone control with accentuated low end and a soft feel | verified | Remo |

## Matte white, which is not the same as smooth white

A bass drum front head is the biggest thing an audience looks at, and there are three white options in
this range that behave differently.

A **Smooth White** head is plain white film: glossy, and under a spotlight it reflects.

A **coated** head is clear film with white coating sprayed on: matte, but the coating is added mass.

A **White Suede** head is white film run through Remo's texturing process: matte, non-reflective, with
the texture worked into the surface rather than laid on top of it.

That last route gets you the matte look with less added mass than a coating, which is why Remo can
describe this head as focused and warm without calling it damped.

## What the ring is for

The 10-mil inlay ring bonded around the perimeter is the Powerstroke mechanism, and it is a targeted
one. High, tight overtones live at the edge of a head; the fundamental lives at the centre. Damp the
edge and the ring goes away while the note stays.

On a bass drum that is exactly the intervention wanted, because the uncontrolled part of a bass drum's
sound is nearly always edge ring rather than too much low end. Remo's phrase for the result is
overtone control with accentuated low end — accentuated by subtraction, not by addition.

## Either side

Remo lists this for batter and resonant bass drum use both.

On the **batter** side the textured surface gives a felt beater a marginally softer contact, and the
matte white shows wear where the beater lands, which makes it easy to judge when the head is finished.

On the **front** the matte white is the classic bass drum face — the surface most logos and heads
printed with band names are applied to — and it stays readable under lights where gloss white blows
out.

## Where it fits

Bass drums 18 to 26 inch on kits that should look bright and sound controlled. Black Suede is the same
construction in matte black; Smooth White is the glossier and slightly more open white alternative.

## Sources

1. Powerstroke P3 White Suede — Remo (tier 1) https://remo.com/product/powerstroke-p3-white-suede

---
Source: https://thedrumatlas.com/drumheads/remo-powerstroke-p3-white-suede · Values marked "unverified" are editorial knowledge awaiting a source.
