---
title: "Remo Powerstroke P3 Fiberskyn"
brand: "Remo"
category: "Drumhead"
url: "https://thedrumatlas.com/drumheads/remo-powerstroke-p3-fiberskyn"
updated: "2026-09-24"
reviewed: "no"
---

# Remo Powerstroke P3 Fiberskyn

The Remo Powerstroke P3 Fiberskyn is a bass drum head of film laminated to a 3-mil polyspun fibre face, with a 2-mil inlay ring for overtone reduction. Remo builds it on 7.5-mil Diplomat or 10-mil Ambassador film, and lists a focused warm tone with enhanced low-frequency definition and controlled overtones.

**Sizes:** 18 in, 20 in, 22 in, 23 in, 24 in, 26 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Plies | 1 | verified | Remo |
| Film thickness | 7.5 or 10 mil | verified | Remo |
| Coating | Textured — Fiberskyn fibre laminate | verified | Remo |
| Position | Batter or resonant | verified | Remo |
| Dampening | 2-mil inlay ring for overtone reduction | verified | Remo |
| Intended use | Bass drum | verified | Remo |
| Character | Focused warm tone with enhanced low-frequency definition and controlled overtones | verified | Remo |

## A skin-faced bass drum head with a ring in it

Two ideas that do not usually meet. **Fiberskyn** is film with a 3-mil polyspun fibre mat bonded to
the playing face — a synthetic calfskin, warm and soft, built for concert and vintage-voiced work.
**Powerstroke** is a perimeter inlay ring, built to stop a bass drum ringing.

Putting them together produces a bass drum head that is both warm at the surface and controlled at the
edge, which is a genuinely useful combination for anyone chasing an old bass drum sound without
stuffing the drum full of blankets.

## A lighter ring than the rest of the range

Worth noting because it is unusual: this head carries a **2-mil** inlay ring, where most P3 bass heads
carry 10 mil.

That is a deliberate decision and a sensible one. The fibre face is already damping the top of the
spectrum — that is what a fibre face does — so a heavy ring on top of it would over-damp the head and
lose the low-frequency definition Remo is claiming. Two mil takes the last of the edge ring off and
stops there.

The phrase on the page is *slightly dampened high-frequency overtones*, which is a more modest claim
than the rest of the P3 range makes, and it matches the lighter ring.

## Two film weights under one name

Remo builds this on either 7.5-mil Diplomat film or 10-mil Ambassador film, depending on the head. That
is worth checking against the part number when ordering, because the difference is real: the lighter
substrate is more responsive and tunes lower comfortably, the heavier one takes a harder beater.

Both carry the same 3-mil fibre lamination.

## What it sounds like under a beater

A felt beater on a fibre face produces almost no click at all — the transient arrives as a woody thump.
Remo's description, focused warm tone with enhanced low-frequency definition, is the honest one: taking
the high overtones out of a bass drum makes its pitch *easier* to hear, not harder.

## Where it fits

Jazz and vintage-voiced bass drums, and studio work where the drum has to sound like an old record.
The Felt Tone Fiberskyn is the same surface with a free-floating felt strip instead of an inlay ring;
the P3 Renaissance is the treated-film route to a similar warmth.

## Sources

1. Powerstroke P3 Fiberskyn — Remo (tier 1) https://remo.com/product/powerstroke-p3-fiberskyn

---
Source: https://thedrumatlas.com/drumheads/remo-powerstroke-p3-fiberskyn · Values marked "unverified" are editorial knowledge awaiting a source.
