---
title: "Remo Powerstroke P3 Felt Tone Coated"
brand: "Remo"
category: "Drumhead"
url: "https://thedrumatlas.com/drumheads/remo-powerstroke-p3-felt-tone-coated"
updated: "2026-09-24"
reviewed: "no"
---

# Remo Powerstroke P3 Felt Tone Coated

The Remo Powerstroke P3 Felt Tone Coated builds the oldest bass drum muffling trick — a strip of felt laid against the head — into the head itself. A free-floating felt dampening strip runs across the film, so the traditional dampened bass sound arrives assembled rather than needing the drum to be taken apart to fit it.

**Sizes:** 18 in, 20 in, 22 in, 24 in, 26 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Coating | Coated | verified | Remo |
| Position | Batter or resonant | verified | Remo |
| Dampening | Free-floating felt dampening strip | verified | Remo |
| Intended use | Bass drum; vintage and contemporary drum-set applications | verified | Remo |
| Technology | Felt Tone — traditional felt-strip dampening built into the drumhead | verified | Remo |

## The oldest bass drum trick, factory-fitted

Before muffling rings, gels and pre-damped heads, bass drums were tamed with a **strip of felt** laid
across the inside of the head, held in place by the head's own tension where it crossed the shell.
Nearly every bass drum built before about 1970 had one, and a great many of the records people are
still trying to sound like were made with one.

It works because a felt strip is a line contact rather than a surface. It damps a narrow band across
the head and leaves the rest free, which shortens the note without killing the low end the way a
pillow against the whole head does.

The catch has always been fitting it. A felt strip means loosening the head, threading felt across the
shell, and tuning the drum back up — and adjusting it means doing all of that again.

## What Remo has done about it

The strip here is built into the head as a **free-floating** element, so it arrives assembled and
tensioned correctly. Remo's description is straightforward: the traditional style of dampening a bass
drum, in an easy-to-install all-inclusive drumhead.

Free-floating matters. A strip bonded to the film would damp a fixed amount at every tension; one that
floats against the head keeps contact as the head moves, which is how a real felt strip behaves.

## Coated, and what the pairing gives

The coated surface adds mass on the playing side, softening the beater transient into something woodier
and rounder before the felt strip has done anything.

So two period-appropriate things stack: a warm, matte batter face and a line of felt behind it. For a
drum that is meant to sound like it was recorded in 1968, this is a closer starting point than a modern
pre-muffled head with a heavy inlay ring, because the damping is narrow and targeted rather than
distributed around the whole perimeter.

## Where it fits

Bass drums 18 to 26 inch, vintage and contemporary alike — Remo names both. The Hazy version is the
brighter, uncoated alternative; the Fiberskyn version puts the same strip behind a skin-like face.

## Sources

1. Powerstroke P3 Felt Tone Coated — Remo (tier 1) https://remo.com/product/powerstroke-p3-felt-tone-coated

---
Source: https://thedrumatlas.com/drumheads/remo-powerstroke-p3-felt-tone-coated · Values marked "unverified" are editorial knowledge awaiting a source.
