---
title: "Remo Powerstroke P3 Coated Black Dot"
brand: "Remo"
category: "Drumhead"
url: "https://thedrumatlas.com/drumheads/remo-powerstroke-p3-coated-black-dot"
updated: "2026-09-24"
reviewed: "no"
---

# Remo Powerstroke P3 Coated Black Dot

The Remo Powerstroke P3 Coated Black Dot is one ply of 10-mil coated film with a 10-mil inlay ring and a black dot underneath the centre. The ring takes the edge overtones off, the dot reinforces where the beater lands, and the coating rounds the attack: midrange and low-end resonance with increased durability.

**Sizes:** 18 in, 20 in, 22 in, 23 in, 24 in, 26 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Plies | 1 | verified | Remo |
| Film thickness | 10 mil | verified | Remo |
| Coating | Coated | verified | Remo |
| Position | Batter | verified | Remo |
| Dampening | 10-mil inlay ring at the perimeter, plus a bottom black dot at the centre | verified | Remo |
| Dot position | Bottom | verified | Remo |
| Intended use | Bass drum | verified | Remo |
| Character | Midrange and low-end resonant tones with increased durability | verified | Remo |

## Three interventions, three different jobs

Worth separating out, because this head is often described as simply "damped" when in fact each part
does something distinct.

The **10-mil inlay ring** sits at the perimeter. That is where a head's high, tight overtones live, so
damping there removes the ring while the fundamental at the centre survives.

The **bottom black dot** sits under the beater's contact area, stiffening and reinforcing the small
region that does the mechanical work.

The **coating** covers the playing surface, adding mass that softens the beater transient and shortens
what is left of the decay.

Remo's summary is midrange and low-end resonant tones with increased durability — control from the
ring, warmth from the coating, life from the dot.

## Why the dot is underneath here

Remo specifies a **bottom** dot on the coated version and a top dot on the clear one, which is a
consistent pattern across the range and a sensible one.

A dot on top is the most durable arrangement, because the beater never touches the base film. But it
also replaces the playing surface — and on a coated head the coated surface is the reason you bought
it. Putting a dot over it would hand back the warmth the coating provides.

Underneath, the beater meets coating as normal and the dot does its stiffening from below. A little
less durable than a top dot; considerably more consistent with the rest of the head's design.

## What this gets you over the plain coated P3

Mostly life, and some punch. A plain coated Powerstroke P3 is one of the standard bass drum batters in
the world and it wears out at the beater spot. Adding a dot there extends that considerably and firms
up the front edge of the note as a side effect.

If your bass batters are dying at the contact point rather than losing their tone, this is the
straightforward answer.

## Where it fits

Bass drum batters 18 to 26 inch on kits played hard, where the sound should stay warm. The clear
version keeps more attack and puts the dot on top. Remo credits the design's inspiration to Steve
Smith.

## Sources

1. Powerstroke P3 Coated Black Dot — Remo (tier 1) https://remo.com/product/powerstroke-p3-coated-black-dot

---
Source: https://thedrumatlas.com/drumheads/remo-powerstroke-p3-coated-black-dot · Values marked "unverified" are editorial knowledge awaiting a source.
