---
title: "Remo Powersonic Coated"
brand: "Remo"
category: "Drumhead"
url: "https://thedrumatlas.com/drumheads/remo-powersonic-coated"
updated: "2026-09-24"
reviewed: "no"
---

# Remo Powersonic Coated

The Remo Powersonic Coated is a bass drum head of two plies — 7 mil over 5 — with dampening rings placed specifically to control subsonic content. Two plies self-damp, and the placed rings target what a bass drum actually needs controlling, giving focused low-end with a subtle attack.

**Sizes:** 18 in, 20 in, 22 in, 23 in, 24 in

## Specifications

| Attribute | Value | Status | Source |
|---|---|---|---|
| Plies | 2 | verified | Remo |
| Film thickness | 7 + 5 mil | verified | Remo |
| Coating | Coated | verified | Remo |
| Position | Batter | verified | Remo |
| Dampening | Specifically placed subsonic dampening rings | verified | Remo |
| Intended use | Bass drum | verified | Remo |
| Character | Focused low-end with a subtle attack | verified | Remo |

## Placed rings, not a ring

The phrase on Remo's page is worth reading carefully: **specifically placed subsonic dampening rings**.
Plural, and placed.

Most damped bass drum heads carry one ring around the perimeter. That is a sound design and it deals
with edge overtones. But a 22-inch membrane has more going on than an edge and a centre — it has a whole
set of modes at different radii, and the low-frequency ones are where a bass drum's boom and its
uncontrolled sub content live.

Putting dampening in more than one place lets those be targeted individually, which is a different
proposition from damping the rim and hoping.

## Two plies underneath it

Seven mil over five, unevenly matched on purpose. The thicker ply takes the beater; the thinner one does
the two-ply damping job without the mass a matched pair would add.

That gives the head self-damping before the rings do anything — the plies move slightly against each
other and turn vibration into heat — and it gives the beater a stiffer surface to work against, which
sharpens the transient.

Twelve mil total, in two layers, is a moderate weight for a bass batter. This is not a head that gets
its control from sheer thickness.

## Coated, and the attack

Remo's description for this version is focused lows with a **subtle attack** — a deliberately
different phrase from the clear version's *increased attack*. The coating is the reason: it is mass on
the playing surface, and it rounds the beater transient into something woodier and less immediate.

That single word is the whole difference between the two heads. If the drum needs a harder front edge, the clear version is the one.

## Where it fits

Bass drum batters 18 to 24 inch, where the low end must be focused and the sub content
controlled without a pillow in the drum. Remo's SMT range is the alternative approach — an integral
pre-muffled construction rather than placed rings.

## Sources

1. Powersonic Coated — Remo (tier 1) https://remo.com/product/powersonic-coated

---
Source: https://thedrumatlas.com/drumheads/remo-powersonic-coated · Values marked "unverified" are editorial knowledge awaiting a source.
